For contractors and large farms

The PROLANDER is a versatile vibrating tine cultivator available up to 14 m working width. It can perform multiple operations, from shallow stubble cultivation to seedbed preparation in a second pass. It is the ideal tool for min-till farming.

• The largest clearance equipped with 5 rows with various equipment and rollers
• Efficient solution with the possibility to add seeding equipment and tool-free adjustment
• Adaptability with continuous hydraulic adjustment of the working depth and different types of tines

OPTIMER L & XL ranges are available from 3 to 12.5 metres wide. Depending on the working depth and the volume of plant residue to be worked, you will choose the model best suited to your working conditions: OPTIMER L with 510 mm diameter discs or OPTIMER XL with 620 mm diameter discs. The diameter of the disc directly influences tillage. The small diameter of the L disc generates a high rotation speed for shallow stubble ploughing and soil preparation down to 10 cm. The large disc of the OPTIMER XL ensures good scalping, and good mixing up to 15 cm.

• Suitable for tractors from 70 to 700 horsepower
• Strong penetrating ability
• STEADY CONTROL technology enables consistent quality and depth of work, even on irregular plots
• A wide range of roller and equipment to perfect your soil cultivation

The HR 7040 R and HR 8040 R folding power harrows, with a working width of 7.00 and 8.00 meters respectively, represent an effective solution for arable farms looking for high productivity. The clever design of the rotor drive and the robust gearbox ensure a very long service life and low maintenance costs.

• High work output: suitable for tractors up to 480 hp (HR 7040 R) and 500 hp (HR 8040 R)
• Real-time adaptation to working conditions with standard hydraulic depth and leveling adjustments
• Robustness: FAST-FIT DURAKUHN carbide-coated tines

The ESPRO RT 12000 RC trailed seed drill has been specially designed to meet the needs of large farms in Eastern Europe. With its 12 m working width, it features a high work output and is suitable for intensive use.

• Non-stop seeding: seeding capacity of up to 16 ha/h!
• No compromises: 2 pressurised 6,500-litre hoppers with independent metering units
• Min-till seeding: furrow-opening disc pressure of up to 250 kg

The MEGANT 722 R and 802 R tine seed drills, with working widths of 7.20 and 8.00 m respectively, ensure high work outputs while controlling establishment costs and maintaining high work quality.

• Great versatility: seeding on dry, wet or stony soils; on tilled or min-tilled land
• High work output: up to 8 ha/h for the 8 m model.
• Low fuel consumption
• Regular seeding depth: front depth control wheels supporting the hopper load and rear press wheels.

The HR 6030/6040 RCS power harrows, with a working width of 6 m, were designed to work independently or in combination with a cereal seeding bar (BTFR) or precision seed drill (KOSMA CSM). These combinations, coupled with a TF 2300 C front hopper, form a balanced system with high autonomy.

• Seeding bar fitted to the frame of the power harrow roller: limited overhang, excellent ground following and constant seeding depth
• Optimum comfort: hydraulic adjustments directly from the cabin
• Wide selection of seeding units: Suffolk coulter, disc coulters, SEEDFLEX 1000 or KOSMA seeding units

The AXENT 100.1 trailed fertiliser spreader is designed to meet the needs of agricultural contractors and arable farms in terms of autonomy, precision, and operating comfort! Not only can it spread up to 400 kg/ha over 36 m at more than 20 km/h, with precision, but it can also work at widths of up to 50 m! It integrates advanced technologies that provide your crops with the right amount of fertiliser while keeping costs under control.

• High autonomy: up to 30 ha of autonomy
• Versatility: possibility to spread either granular fertiliser or soil-enriching agents
• Precision thanks to the EMC technology

The AERO GT 60.1 pneumatic fertiliser spreader pushes back the limits of performance and precision in fertilisation. Thanks to its boom and high-tech components, it offers uncompromising spreading while saving on fertiliser purchases!

• Excellent lateral distribution: precise spreading of fine, light, or compound fertiliser even in windy conditions
• Precise application rate: 6 sections that can be switched on, off and adjusted individually
• High comfort and performance: automatic boom height adjustment (optional) ; ISOBUS as standard
• Long autonomy: up to 320 kg/ha of urea over 36 m at 15 km/h; hopper capacity of 6,300 litres

The AXIS 50.2 H-EMC-W fertiliser spreader combines multiple high-tech solutions. It ensures the delivery of the optimal amount of fertiliser to crops, in the right place, while controlling input costs.

• CDA distribution: precise and constant spreading, even if the fertiliser application rate, the working width or speed varies
• EMC regulation: independent left/right regulation every second
• SpeedServo electric motors: adjustment of the drop point and spreading outlet opening 2.5 to 5 times faster than a conventional cylinder

Choosing the KARAN sprayer means opting for uncompromising efficiency. Designed to meet the highest expectations, KARAN combines performance, comfort, protection (of crops, soil and operator) and sustainability. It is available with tank capacities from 4,500 to 6,000 L and booms up to 39 m.

• High performance: A high work output thanks to high ground speeds (up to 25 km/h) made possible by the EAGLE contour control system.
• User comfort: With its premium, ergonomic and intuitive design, the KARAN operator’s station makes machine operation simple and effortless.
• Comprehensive protection: The sprayer protects the operator, the soil and the crops, thanks to the AUTOSPRAY technology, ensuring optimal application quality

The FC 13460 RA mower conditioner offers a significantly higher work output than conventional mowing combinations. It is an enduring machine, designed to increase the productivity of harvesting systems while reducing the cost of mowing. Its robustness and low maintenance minimize maintenance costs.

• Exceptional work output!
• Reduce your operating costs without further delay
• Reduce maintenance costs with a reliable tool

Mounted disc mower with an exclusive working width of 14.50 metres, the GMD 15030 sets the standard for outstanding work output. The machine integrates all KUHN's expertise, including a patented gearbox designed to offer optimum compactness for transport and efficient power transmission during work.

• High work output: up to 20 ha/h at 15 km/h
• Complies with size restrictions of 3 metres wide and 3.8 metres high
• Optimal ground following: independent articulation on each of the two side cutter bars

The GMD 9530 RV offers a new swathing system compared to mower conditioners equipped with a swath grouper: the auger re-centres the unconditioned fodder to deliver it on the swath of the front unit. With a working width of 9.10 to 9.50 m, the mower ensures high work output.

• High working capacity: 500 mm diameter auger rotating at 900 rpm
• Versatility: grouped swath delivery, delivery with one unit raised and delivery over the whole mower width
• Renowned equipment: OPTIDISC ELITE cutter bar and LIFT-CONTROL system combined with NON-STOP safety

Mowing, conditioning and swathing with a single machine. The FC 9830 RA mower conditioner features an easily adjustable finger conditioner that adapts to different types of fodder and weather conditions thanks to two lever-controlled speeds. The LIFT-CONTROL suspension ensures excellent ground following and effective protection of the machine when combined with the NON-STOP safety.

• Limited weight: just over 4 tons
• High performance and easy to use: settings controlled from an ISOBUS terminal
• High work output: 9.70 m working width

The GF 13003 (T), GF 15003 T and GF 17003 T wide tedders work at widths of 13 to 17.2 m, meeting the needs of users looking for high work output. Equipped with DIGIDRIVE finger coupling, power transmission is reliable and maintenance-free, maximising time spent in the field.

• Easy to use and error-free
• Fodder fully turned over and well aerated with the small diameter OPTITEDD rotor
• HLC function: raise all rotors in headlands with a single action

The MERGE MAXX 952 and MERGE MAXX 1092 belt mergers are ideal machines for contractors, machinery cooperatives or large dairy farms working large areas who count on efficient and well-organised harvesting chains. The ISOBUS compatibility of these two models ensures greater ease of use for quick and easy adjustments according to conditions.

• Excellent fodder quality with no risk of leaf loss or soil and stones being introduced into the windrow
• Maximum versatility thanks to eight different delivery options
• Efficient ground following and preservation of grass stubble
• Reduced operating and maintenance costs thanks to reinforced, quickly replaceable working parts

Synonymous with high yields, versatility and impeccable work quality, the GA 13231, GA 14231 and GA 15231 four-rotor rakes, with working widths of 8.40 to 12.50 m, 9 to 13.70 m and 9.50 to 14.70 m respectively, ensure an efficient harvesting chain.

• 100% hydraulic rotor drive: limited daily maintenance and ultra-quiet operation
• Perfectly formed windrow with the Boost function increasing the rotation speed of the front rotors by 20%
• Easy to use and simplified settings thanks to ISOBUS
• Automated manoeuvring thanks to Section Control

With today’s narrow harvesting windows, you need a large square baler that brings increased productivity, without compromising on density and bale shape. Designed to set new standards in capacity, bale shape, uptime and running costs, the KUHN SB series is here to deliver. Opt for the SB 1290 iD when you want to produce bales with extremely high densities in all crop conditions.

• High intake capacity while offering extreme endurance
• INTEGRAL ROTOR technology and POWER DENSITY system for high density bales
• Patented TWINPACT system on SB 1290 iD for 25% higher bale density in tough straw conditions

The VB 7100 series sets a new standard in round baling. Rely on constant high performance in all circumstances. No matter the crop, no matter the time of day, these balers offer high-density bales, high capacity and maximum lifetime. Where others stop, the VB 7100 series starts.

• Bale densities of up to 140 kg/m³ in straw
• Extreme robustness and reliability
• Fastest tailgate operation in the market

VBP 7100 series variable baler-wrapper combinations represent a new league. Fully dedicated to contractors and farmers who are looking for the most powerful and versatile machines. From producing large, dense straw bales to perfectly shaped, short crop silage bales with high moisture content; VBP 7100 balers impress in every condition.

• Unique bale chamber design for unrivalled bale density and versatility
• Unrestricted intake and fastest bale transfer
• Patented i-DENSE density regulation system and TWIN-reel film binding system

True wrapping intelligence. The versatile SW 4014 square and round bale wrapper provides fast, cost efficient and operator-friendly wrapping. Discover the unique patented AUTOLOAD function which detects, loads, wraps and unloads bales automatically.

• AUTOLOAD function for non-stop fully automatic wrapping
• INTELLIWRAP technology for optimal wrapping film use
• Unique "drive-through" design for easy bale loading and excellent view of the wrapping process