BTF - BTFR seeding bars

BTF seeding bar Silhouette

From versatility to autonomy

Rigid and foldable seeding bars with working widths of 3.00 to 6.00m. They make an effective combination when coupled to a power harrow and TF 1512 front hopper. These seeding bars are equipped with SEEDFLEX seeding units: offset double disc on a parallelogram system.

Find a distributor near you

BTF and BTFR SERIES seeding bars ensure optimum work output with great soil/seed contact to ensure the germination of your crops. In combination with the TF 1512 front hopper and power harrows you get a truly versatile seeding combination equipped with cutting-edge technology but simple to use. Remember that 50 % of your harvest is already determined during seeding. The SEEDFLEX seeding bar will manage this to your satisfaction, even at fast ground speeds.
BTFR 6030 rigid seeding bar and HR 6040 Power Harrow at work

Your benefits

A concentrate of reliability and precision to demand quality seeding

SEEDFLEX seeding units on BTF or BTFR seeding bar with offset double disc on parallelogram

Choose the SEEDFLEX seeding units: reliable and precise

This 41 mm offset double-disc coulter bar allows for perfect furrow opening. The discs are mounted on a parallelogram over two rows and fitted with a press wheel for accurate control of the seeding depth of each unit. With a clearance of 35 cm between the front and rear rows, SEEDFLEX seeding units are suitable for different extreme and maintenance-free uses. You benefit from rigorously identical ground pressure on both rows adjustable up to 45 kg. The guiding tip of the seeds to the bottom of the furrow allows you to enjoy excellent seeding depth evenness.

Electrically driven VENTA metering system

The VENTA metering system of the TF 1512 hopper is recognized for its simple design and precise and regular metering. The centralised metering unit has large volumetric flutings for large seeds (wheat, barley, peas, beans...) as well as smaller ones for small seeds (rapeseed, alfalfa,...). The application rates range from 1 to 430 kg/ha. The metering unit is electrically driven, which allows modulating the application rate "continuously" manually or by GPS without leaving the cab. This reliable and robust drive requires no maintenance.
Electrically driven VENTA metering unit on front hopper  TF 1512

Improve your work output

Hydraulic settings of seeding depthn ground pressure and hydraulic lift fo the BTF or BTFR seeding bar

Benefit from hydraulic settings from the cab

In the cabin, you adjust hydraulically the seeding depth, ground pressure and seeding bar lift. Thus your can carry out fast and precise adjustments. You can also make a passage without seeding when required by the terrain. Two cylinders with spacers are used as base point for the seeding depth and ground pressure.

Easy to attach to the power harrow

It is easy to couple and uncouple the seeding bar with no tools are required. The power harrow can be used solo due to the seeding bar's hydraulic lift system that makes it possible to carry out a seeding-free passage without uncoupling. As the seeding bar is attached to the roller frame, there is no need to readjust seeding depth when the power harrow's working depth changes!
Easy to attach the seeding bar to the power harrow's roller frame

Travel easily, safely and legally

Transport wheels of the support system for semi-automatic coupling of the BTF and BTFR  seeding bars that ensure easy, safe and legal road transport

Travel easily

The BTF and BTFR seeding bars are equipped with a removable transport assistance system and a semi-automatic coupling support system. Moving from transport to working position is very easy and you have no constraint at work. The removable carrying frame supports the weight of the combination during transport. The maximum load on the rear axle and the tractor gross weight are respected. The chassis is fitted with pivoting twin-wheels of large diameter. The carrying frame is easily removed thanks to the semi-automatic coupling. During work, it is parked at the end of the field to lighten the unit. For road transport, the hydraulic top link point is placed in the floating position. This ensures a smooth ride regardless of the road contours.

A well-balanced combination

Designed for drilling combinations with power harrows, the rigid BTF and folding BTFR seeding bars work just as well in ploughed land as min-tilled. In combination with a front hopper, the tractor’s rear-axle load is reduced, resulting in better tractor/machine balance. You also get SEEDFLEX technology that ensures exceptionally high-quality seeding.
BTFR 6030 seeding bar, HR 6040 RCS and TF 1512 front hopper combination on the road

Equipment

Electronic equipment for BTF and BTFR seeding bars can provide increased ease of use and precision in seeding and tramlining management.

BTF 4030 rigid seeding bar and TF 1512 front hopper at work

Specifications

Technical Characteristics

 
Working width (m)
Transport width (m)
Weight approx. (kg)
Frame
Required tractor hydraulic equipment
BTF 3000 24 DD VENTA BTF 3030-24 BTF 302 24 3R BTFR 4000 27 DD BTFR 4000 32 DD BTFR 4500 36 DD BTFR 4500 30 DD BTFR 5000 33 DD BTFR 5000 40 DD BTFR 6010-48
3.00 3.00 4.00 4.00 4.50 4.50 4.95 5.00 6.00
3.02 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00
750 750 965 1040 1175 1070 1200 1300
Rigid with standardised hitch Cat. 2 Rigid Rigid with standardised hitch Cat. 2 Foldable with standardised Cat. 2 hitch Foldable with standardised Cat. 2 hitch Foldable with standardised Cat. 2 hitch Foldable with standardised Cat. 2 hitch Foldable with standardised Cat. 2 hitch Foldable with standardised Cat. 2 hitch
1 DA for side markers
1 DA for coulter bar lifting
1 DA for side markers 1 DA for side markers
1 DA for coulter bar lifting
1 DA for hydraulic switch controlled by QUANTRON S-2 - side markers and coulter bar lift
1 DA for combined folding of power harrow and coulter bar
1 DA for hydraulic switch controlled by QUANTRON S-2 - side markers and coulter bar lift
1 DA for combined folding of power harrow and coulter bar
1 DA for hydraulic switch controlled by QUANTRON S-2 - side markers and coulter bar lift
1 DA for combined folding of power harrow and coulter bar
1 DA for hydraulic switch controlled by QUANTRON S-2 - side markers and coulter bar lift
1 DA for combined folding of power harrow and coulter bar
1 DA for hydraulic switch controlled by QUANTRON S-2 - side markers and coulter bar lift
1 DA for combined folding of power harrow and coulter bar
1 DA for hydraulic switch controlled by QUANTRON S-2 - side markers and coulter bar lift
1 DA for combined folding of power harrow and coulter bar

Machine in combination

 
Soil preparation tool
Front hopper
BTF 3000 24 DD VENTA BTF 3030-24 BTF 302 24 3R BTFR 4000 27 DD BTFR 4000 32 DD BTFR 4500 36 DD BTFR 4500 30 DD BTFR 5000 33 DD BTFR 5000 40 DD BTFR 6010-48
HRB 303 - HR 304 - HR 3004 HR 3020 / 3030 / 3040 / CD 3020 HRB 403 DR - 4004 DR HRB 403 DR - 4004 DR HRB 453 DR - 4504 DRC HRB 453 DR - 4504 DRC HRB 503 DR - 5004 DRC HRB 503 DR - 5004 DRC HR 6040 RCS
TF 1512 QS-2 (with transfer tube p/no. 1286921)
TF 1500 QS2 (if TF 1500 QS serial no. < 19999 - requires 1 x 1286770)
Not compatible with TF 702
TF 1512 ISOBUS or QUANTRON S2 (with transfer tube 1286865) TF 1500 QS2
(if TF 1500 QS serial no. < 19999 - requires 1 x 1286770)
Not compatible with TF 702
TF1512 ISOBUS (with transfer tube p/no. 1286862)

TF1512 QS-2 (with transfer tube p/no. 1286865)

TF1500 QS-2 (with transfer tube p/no.1286815 + cable 1286999 + software update)
TF1512 ISOBUS (with transfer tube p/no. 1286862)

TF1512 QS-2 (with transfer tube p/no. 1286865)

TF1500 QS-2 (with transfer tube p/no.1286815 + cable 1286999 + software update)
TF1512 ISOBUS (with transfer tube p/no. 1286862)

TF1512 QS-2 (with transfer tube p/no. 1286865)

TF1500 QS-2 (with transfer tube p/no.1286815 + cable 1286999 + software update)
TF1512 ISOBUS (with transfer tube p/no. 1286862)

TF1512 QS-2 (with transfer tube p/no. 1286865)

TF1500 QS-2 (with transfer tube p/no.1286815 + cable 1286999 + software update)
TF1512 ISOBUS (with transfer tube p/no. 1286862)

TF1512 QS-2 (with transfer tube p/no. 1286865)

TF1500 QS-2 (with transfer tube p/no.1286815 + cable 1286999 + software update)
TF1512 ISOBUS (with transfer tube p/no. 1286862)

TF1512 QS-2 (with transfer tube p/no. 1286865)

TF1500 QS-2 (with transfer tube p/no.1286815 + cable 1286999 + software update)
TF 1512 ISOBUS or QS-2 (with transfer tube 1286865)

Tramlining

 
Number of valves
Metering half width shut-off
Manual row shut-off
Compatibility with treatment widths (m)
BTF 3000 24 DD VENTA BTF 3030-24 BTF 302 24 3R BTFR 4000 27 DD BTFR 4000 32 DD BTFR 4500 36 DD BTFR 4500 30 DD BTFR 5000 33 DD BTFR 5000 40 DD BTFR 6010-48
2 x 2 row symmetrical and asymmetrical rhythms 2x2 row symmetrical and asymmetrical rhythms
As optional equipment
As standard As standard As standard As standard As standard As standard As standard As standard As standard
12 - 15 - 18 - 21 - 24 - 27 - 30

Seed placement / Seeding control

 
Number of rows
Spacing between rows (cm)
Type of seeding unit
Ground pressure adjustment on Suffolk coulter units
Press and depth control wheels
Hard coated inside disc scrapers
Seeding depth adjustment
BTF 3000 24 DD VENTA BTF 3030-24 BTF 302 24 3R BTFR 4000 27 DD BTFR 4000 32 DD BTFR 4500 36 DD BTFR 4500 30 DD BTFR 5000 33 DD BTFR 5000 40 DD BTFR 6010-48
24 24 27 32 36 30 33 40 48
12.5 12.5 15 12.5 12.5 15 15 12.5 12.5
SEEDFLEX double disc coulters on a parallelogram spaced at 35 cm apart SEEDFLEX double disc coulters on 35 cm offset parallelograms SEEDFLEX double disc coulters on a parallelogram spaced at 35 cm apart SEEDFLEX double disc coulters on a parallelogram spaced at 35 cm apart SEEDFLEX double disc coulters on a parallelogram spaced at 35 cm apart SEEDFLEX double disc coulters on a parallelogram spaced at 35 cm apart SEEDFLEX double disc coulters on a parallelogram spaced at 35 cm apart SEEDFLEX double disc coulters on a parallelogram spaced at 35 cm apart Trailing coulters over 3 rows 33cm distant
Hydraulic
As standard As standard As standard As standard As standard As standard As standard As standard
As standard As standard As standard As standard As standard As standard As standard As standard
Centralised manual adjustment Centralised manual adjustment Centralised manual adjustment Centralised manual adjustment Centralised manual adjustment Centralised manual adjustment Centralised manual adjustment Centralised manual adjustment Centralised manual adjustment Hydraulic by cylinder with spacers

Equipment

 
Parking stands
BTF 3000 24 DD VENTA BTF 3030-24 BTF 302 24 3R BTFR 4000 27 DD BTFR 4000 32 DD BTFR 4500 36 DD BTFR 4500 30 DD BTFR 5000 33 DD BTFR 5000 40 DD BTFR 6010-48
As standard As standard As standard As standard As standard As standard As standard

Media