PROFILE PLUS 1 CL Single-Auger Mixers

Details of the PROFILE PLUS 1 CL

Extra capacity!

PROFILE PLUS 1 CL mixer wagon with 1 vertical auger, straw-blowing turbine, cross-conveyor distribution and wide tub. Available in 12 to 15 m3 formats, for dairy herds of between 60 and 110 cattle.

Find a distributor near you

The largest capacity with the lowest height on the market!

The vertical single auger mixer wagon offers a new solution for all farmers with difficult-to-access buildings and/or who need a variety of non-standard distribution configurations. Compact size is the key feature of these PROFILE PLUS single-auger mixer wagons, with all the features of a versatile machine for straw-blowing. The tub geometry enables larger capacities at lower heights, for example the 13 m3 model comes in at just under 3 m overall height.
PROFILE PLUS 1 CL at work

Your benefits

A perfectly even mix for your feed

The KUHN PROFILE mixer wagon: the lowest height on the market!

Extra capacity!

The largest capacity with the lowest height on the market!

This generation of vertical single auger mixer wagons offers a new solution for all farmers with difficult-to-access buildings and/or who need a variety of non-standard distribution configurations.

Compact size is the key feature of these PROFILE PLUS single-auger mixer wagons. The tub geometry enables larger capacities at lower heights, for example the 13 m3 model comes in at just under 3 m overall height.

Exclusive KUHN mixing auger!

The double-pitch angle of the auger enables quick breakdown of feed, no matter how full the machine already is.

Knives with asymmetric teeth for a self-cleaning effect. To reduce power requirement, the PROFILE PLUS range is fitted with progressive cutting knives for constant torque transfer. Featuring a continuous coil, the fodder naturally gravitates from bottom to top with no jerky movements. Fuel consumption is reduced during the mixing process.

The auger material and design has been selected to provide maximum resistance to wear.
Exclusive KUHN mixing auger for the PROFILE PLUS mixer wagon

Tried and tested transmission and drive systems

The machine transmission is made up of a two-stage bearing, therefore even during breakdown of a whole bale, stress is absorbed.

The combination of the pre-stressed subframe and the solid auger base provides maximum resistance to the load bearing in the bottom of the machine.

The unit is fitted on a collar which reaches up to approximately half the auger height, not directly to the bottom of the tub, thus protecting the transmission from lateral forces exerted on the auger.
Transmission representing KUHN's extensive experience and technological expertise.

Compare the “door width / auger diameter" ratio!!

Save time with the PROFILE PLUS single auger range designed to accelerate discharge speed. The doors are 1100 mm wide, which is 60% of the auger diameter. This unbeatable ratio guarantees fast, regular distribution even when delivering fibrous rations. The tub can be equipped with one or more discharge doors depending on the configuration of your buildings.
PROFILE PLUS 1 CL at work

158 kg of straw per minute!

PROFILE PLUS: the fastest straw blower on the market!

Turbine powered by the POLYDRIVE system

The straw-blowing turbine is driven by a disengageable belt, for flexible start-up and minimum noise during operation. The power take-off does not have to be switched off to stop the turbine. The large diameter of the turbine (1540 mm) allows it to project straw to a range of 18 m.

The two-speed gearbox allows to switch to a lower speed for cubicle bedding or working at close range.

VENTIDRIVE

The special shape of the PROFILE PLUS straw blowing hatch (VENTIDRIVE patented asymmetric shape) improves straw suction by the turbine. A regular flow is guaranteed at very low engine speed. The straw backflow encountered on rectangular hatches with a flanged turbine is eliminated.

The instant straw blowing rate is equivalent to the Kuhn bedding machine range!
The patented asymmetric form of the VENTIDRIVE straw hatch improves the straw suction capacity of the PROFILE PLUS range.

Cross-conveyor distribution: maximum visibility

A wide selection of possible combinations!

For each member of the herd to get their maximum feed intake, the feed-out of the mixed ration must be evenly mixed and distributed across the whole length of the feed passage. It’s important to reduce competition for feed between livestock in the same batch. All animals must get their fair share of quality mixed rations!

When the animals return to the buildings after grazing, providing a homogeneous ration is the best solution to avoid them pushing and shoving for feed.

The PROFILE range features an impressive selection of discharge solutions to ensure distribution of the rations in all the types of buildings. Whether you have sheds with no separate exit, troughs with retaining rims or very narrow feed passages, feeding tables on both sides of the passage requiring simultaneous distribution, or other constraints requiring distribution from the rear of the machine, you will find what you need in the PROFILE PLUS range.

Cross-conveyor: maximum visibility

The cross-conveyor can be positioned at the rear of the PROFILE PLUS 1 CL range.

Feed can be distributed on the left or right-hand side, as standard. The conveyor is driven by a hydraulic motor at each end guaranteeing perfect operation regardless of the rotation direction.

The PVC belt ensures that fodder doesn’t travel back underneath the belt. The feed passage always remains clean after distribution.

As an option, the cross-conveyor can be hydraulically offset by 250 mm to the left or the right of the machine: ideal for fibrous rations!
Cross-conveyor distribution on the KUHN PROFILE PLUS mixer: left/right distribution as standard

Equipment

PROFILE PLUS 1 CL at work

Specifications

Technical Characteristics

 
Capacity (m3)
Mixing system
Max. blowing distance
Maximum width of the loading bucket (m)
Minimum PTO power requirement kW (hp)
PTO speed (min-1)
Output mini/maxi (l/min) at 180 bar (pressure required)
Minimum tractor hydraulic requirement
Weight, dimensions and discharge height
PROFILE PLUS 12.1 CL PROFILE PLUS 13.1 CL PROFILE PLUS 14.1 CL PROFILE PLUS 15.1 CL PROFILE PLUS 17.1 CL
12 13 14 15 17
1 vertical auger 1 vertical auger 1 vertical auger 1 vertical auger 1 vertical auger
on the right up to 18 m on the right up to 18 m on the right up to 18 m on the right up to 18 m on the right up to 18 m
< 2.82 < 3.02 < 3.02 < 3.02 < 3.02
45 (62) > 55 (75) 49 (66) > 59 (80) 49 (66) > 59 (80) 52 (71) > 63 (85) 55 (75) > 66 (90)
540 540 540 540 540
20 - 50 20 - 50 20 - 50 20 - 50 20 - 50
1 SA with free return 1 SA with free return 1 SA with free return 1 SA with free return 1 SA with free return
See table "Technical Specifications" See table "Technical Specifications" See table "Technical Specifications" See table "Technical Specifications" See table "Technical Specifications"

Media