All Purpose Disc Harrows 8220

KUHN 8220 Tandem disc harrow silhouette

Primary Tillage or Seedbed Finishing. You Decide.

Designed for all-purpose operation in a variety of soil and residue conditions. Working widths range from 5.7 m to 13.5 m.

Find a distributor near you

The KUHN Class II, all-purpose 8220 tandem disc harrows provide all-purpose operation in a variety of soil and residue conditions. Heavier main and wing frame components combined with improved weld joint construction increase strength and reliability. New spring adjustable scraper assemblies provide aggressive and positive cleaning action in a variety of field conditions.

With a variety of Residue Razor disc blades, and wide or narrow spacing, producers can configure the 8220 tandem disc harrow to match their residue and soil conditions for optimum performance. Choose a 24/7 leveling system for a reliable seedbed finish.
8220_Action03_MAW.jpg

Your benefits

The Strength is in the Gang

8220 gang.png

Gang Design

With a choice of 22’’ or 24’’ diameter, 6 gauge or ¼’’ thick Residue Razor™ disc blades on 8’’ or 9-1/8’’ spacing, the 8220 disc harrow can be configured for optimum performance in a variety of residue and soil conditions. The 20-degree front and 19-degree rear gang angle provide consistent residue cutting and mixing. Heavy-duty 6’’ ductile iron spools, rock-flex bearing arms and heavy-duty PEER TILLXTREME™ maintenance-free bearings offer the strength and endurance that sets the 8220 above the competitors.

Residue Razor™ Disc Blades

All KUHN tandem disc harrows are available with Residue Razor disc blades made from Ingersoll's PURE™ steel optimizing strength to withstand stress, fractures, and to provide flexibility in rock conditions. Residue Razor discs have an exceptionally sharp edge, five times sharper than conventional blades. Rollable Disc Blades are also available which allow blades to be re-sharpened for extended residue cutting and soil penetration performance.
Residue Razor.png

Spools

KUHN heavy-cast spools multiply the strength of the disc gang. Spools are line-bored for an exact fit on the tie rod and precision faced to perfectly match the blade surface. A larger bell on the concave end and a smaller bell on the convex end provide an overlap fit against the blades, supporting the blade more positively without creating a stress line.
Spools.png

Spring Adjust Scrapers

The 5-inch scraper is easily adjusted by simply loosening a single bolt, adjusting for scraper gap if needed and locking in place by tightening the bolt. The scraper spring provides the tension to move the scraper to the specified location against the face of the disc blade.
Spring Scrapers.png

Rock-Flex Bearing Arm

Rock-flex bearing arms provide protection from rocky or hard soil conditions. Rock-flex bearing arms feature PEER TILLXTREME™ maintenance-free bearings. The scraper has adjustability to clean the concave side of each disc blade located at the Rock-Flex bearing arms limiting soil and residue buildup in the bearing hanger area.
Bearing Arm Scraper.png

The Ultimate in Transportability

8215_Transport01.jpg

Quad-Fold™ —The Ultimate in Transportability

The KUHN Quad-Fold™ design features a rigid center section with a folding inner and outer wing. The outer wing hydraulically locks to the inner wing in field use to create a 3-section disc with even weight distribution. Quad-Fold 41- and 44-foot models are a full 5-section design. Quad-Fold is available on 8220 – 36’ to 44’ models.

Heavy-Duty Walking Beams

Standard on all 8220 disc harrows, heavy-duty walking beams allow for consistent working depth on rough ground and more stable road transport. Walking beams have slip-in spindles and heavy-duty hubs.
8220 wheels.jpg

Wide or Narrow Spacing

8220 Residue Razor Spool and Scraper.png

Wide or Narrow Spacing

Choose wide or narrow spacing to better match the needs of your operation.
  • Wide Spacing: Wide, 9 1/8”, spacing offers more aggressive residue mixing and leaves a course finish to resist wind erosion and aid in the drying of soil.
  • Narrow Spacing: Narrow, 8”, spacing offers more aggressive residue cutting and leaves a smooth seedbed, ready to plant.

24/7 Leveling Systems

Increase yield potential through better seedbed condition and increase productivity with non-stop farming. KUHN disc harrows can be equipped with the following 24/7 leveling systems:
  • 24/7 3-Row Coil Tine Harrow: Featuring a parallel link leveling system for superior residue flow and even distribution, the coil tine harrow offers an increase in yield potential and improved residue management even in high residue conditions. With 16” long tines, 7/16” diameter, the 24/7 Coil Tine Harrow ensures smoother residue distribution and better chemical incorporation.
  • 3-Bar Spike Harrow: For excellent clod sizing in low to moderate residue conditions, the 3-bar spike harrow is an efficient way to create a level seedbed. Rugged ¾” x 10” square spikes provide long-lasting leveling.
  • 24/7 Soil Conditioning Reel: For maximum clod sizing, leveling and soil firming the 24/7 soil conditioning reel is your choice. Choose the round, spiral rods for loamy soils or flat, spiral blades for high clay soils. A float setting widens the tillage/weather window when operating in wet soil conditions.
24_7_LevelingSystems.png

8220_Action02_MAW.jpg

Specifications

DIMENSIONS

 
A Transport width
B Transport height
8220-19N 8220-19W 8220-22N 8220-22W 8220-25N 8220-25W 8220-28N 8220-28W 8220-31N 8220-31W 8220-34N 8220-34W 8220-36N 8220-36W 8220-36NQF 8220-36WQF 8220-38NQF 8220-38WQF 8220-41WQF 8220-44WQF
12'2" / 3.7" 12'2" / 3.7" 12'2" / 3.7" 12'2" / 3.7" 13'7" / 4.1" 13'7" / 4.1" 16'9 / 5.1 16'9" / 5.1" 16'9" / 5.1" 16'9" / 5.1" 16'9" / 5.1" 16'9" / 5.1" 16'9" / 5.1" 16'9" / 5.1" 17'5 ' / 5.3 17'5" / 5.3" 17'5 ' / 5.3 17'5" / 5.3" 17'17" / 5.4" 17'17" / 5.4"
10'8" / 3.3 10'8" / 3.3 11'10" / 3.6 11'10" / 3.6 11'11" / 3.6 11'11" / 3.6 12'6/3.8 12'6" / 3.8 13'6" / 4.1 13'6" / 4.1 14'9" / 4.5 14'9" / 4.5 15'6" / 4.7 15'6" / 4.7 13'5" / 4.0 13'5" / 4.0 13'5" / 4.0 13'5" / 4.0 13'10" / 4.2 13'10" / 4.2

SPECIFICATIONS Narrow Spacing

 
Frame type
Number of disc blades
Number of bearing arms
Approximate weight (lb /kg)
Approximate working width
8220-19N 8220-19W 8220-22N 8220-22W 8220-25N 8220-25W 8220-28N 8220-28W 8220-31N 8220-31W 8220-34N 8220-34W 8220-36N 8220-36W 8220-36NQF 8220-36WQF 8220-38NQF 8220-38WQF 8220-41WQF 8220-44WQF
3-Section 3-Section 3-Section 3-Section 3-Section 3-Section 3-Section 3-Section 3-Section 3-Section 3-Section 3-Section 3-Section 3-Section 5-Section Quad-Fold 5-Section Quad-Fold 5-Section Quad-Fold 5-Section Quad-Fold 5-Section Quad-Fold 5-Section Quad-Fold
62 54 70 62 78 70 90 78 98 86 106 94 114 98 114 98 118 106 114 122
18 18 22 22 22 20 24 22 26 26 26 26 28 26 30 30 32 32 32 34
13,177 / 5 977 13,310 / 6 037 13,972 / 6 338 14,214 / 6 447 14,828 / 6 726 15,115 / 6 856 18,415 / 8 353 18,599 / 8 436 19,276 / 8 743 19,701 / 8 936 19 782 / 8 973 20,296 / 9 206 21,503 / 9 754 21,701 / 9 843 23,961 / 10 869 24,323 / 11 033 24,394 / 11 065 25,055 / 11 365 30,039 / 13 625 30,779 / 13 961
Two 20.5 x 8 (Kevlar) None Two 20.5 x 8 (Kevlar) None Two 20.5 x 8 (Kevlar) None Two 20.5 x 8 (Kevlar) None None None None None None None None None None None None None

SPECIFICATIONS Wide Spacing

 
Approximate working width
Number of bearing arms
Approximate weight (lb /kg)
8220-19N 8220-19W 8220-22N 8220-22W 8220-25N 8220-25W 8220-28N 8220-28W 8220-31N 8220-31W 8220-34N 8220-34W 8220-36N 8220-36W 8220-36NQF 8220-36WQF 8220-38NQF 8220-38WQF 8220-41WQF 8220-44WQF
18'10" / 5.7 19'9" / 6.0 22'8" / 6.9 22'7" / 6.8 25'2" / 7.6 25'6" / 7.7 28'10" / 8.8 28'5" / 8.6 31'4" / 9.5 31'4" / 9.5 33'10" / 10.3 34'2" / 10.4 36'5" / 11.1 35'8" / 10.8 36'5" / 11.1 35' 8" / 10.8 37'8" / 11.5 38'6" / 11.7 41'5" / 12.6 44'3" / 13.5
8" Front / 8" Rear 9" Front / 9" Rear 8" Front / 8" Rear 9" Front / 9" Rear 8" Front / 8" Rear 9" Front / 9" Rear 8" Front / 8" Rear 9" Front / 9" Rear 8" Front / 8" Rear 9" Front / 9" Rear 8" Front / 8" Rear 9" Front / 9" Rear 8" Front / 8" Rear 9" Front / 9" Rear 8" Front / 8" Rear 9" Front / 9" Rear 8" Front / 8" Rear 9" Front / 9" Rear 9" Front / 9" Rear 9" Front / 9" Rear
Mechanical Fore/Aft Adjustable Mechanical Fore/Aft Adjustable Mechanical Fore/Aft Adjustable Mechanical Fore/Aft Adjustable Mechanical Fore/Aft Adjustable Mechanical Fore/Aft Adjustable Mechanical Fore/Aft Adjustable Mechanical Fore/Aft Adjustable Hydraulic Fore/Aft Adjustable Hydraulic Fore/Aft Adjustable Hydraulic Fore/Aft Adjustable Hydraulic Fore/Aft Adjustable Hydraulic Fore/Aft Adjustable Hydraulic Fore/Aft Adjustable Hydraulic Fore/Aft Adjustable Hydraulic Fore/Aft Adjustable Hydraulic Fore/Aft Adjustable Hydraulic Fore/Aft Adjustable Hydraulic Fore/Aft Adjustable Hydraulic Fore/Aft Adjustable

Disc Gangs

 
Disc gang angle
Disc gangs
Disc blades
Taper blades
Disc scrapers
8220-19N 8220-19W 8220-22N 8220-22W 8220-25N 8220-25W 8220-28N 8220-28W 8220-31N 8220-31W 8220-34N 8220-34W 8220-36N 8220-36W 8220-36NQF 8220-36WQF 8220-38NQF 8220-38WQF 8220-41WQF 8220-44WQF
20 Degrees Front, 19 Degrees Rear 20 Degrees Front, 19 Degrees Rear 20 Degrees Front, 19 Degrees Rear 20 Degrees Front, 19 Degrees Rear 20 Degrees Front, 19 Degrees Rear 20 Degrees Front, 19 Degrees Rear 20 Degrees Front, 19 Degrees Rear 20 Degrees Front, 19 Degrees Rear 20 Degrees Front, 19 Degrees Rear 20 Degrees Front, 19 Degrees Rear 20 Degrees Front, 19 Degrees Rear 20 Degrees Front, 19 Degrees Rear 20 Degrees Front, 19 Degrees Rear 20 Degrees Front, 19 Degrees Rear 20 Degrees Front, 19 Degrees Rear 20 Degrees Front, 19 Degrees Rear 20 Degrees Front, 19 Degrees Rear 20 Degrees Front, 19 Degrees Rear 20 Degrees Front, 19 Degrees Rear 20 Degrees Front, 19 Degrees Rear
1-¾" Round Diameter Alloy Tie Rod, Rock-Flex® Bearing Arms 1-¼" x 2-½", 6" Bell Diameter Ductile Iron Spools, Cast Housing PEER® TILLXTREME™ No Daily Grease Maintenance Bearings, Tie Rod Wrench" 1-¾" Round Diameter Alloy Tie Rod, Rock-Flex® Bearing Arms 1-¼" x 2-½", 6" Bell Diameter Ductile Iron Spools, Cast Housing PEER® TILLXTREME™ No Daily Grease Maintenance Bearings, Tie Rod Wrench" 1-¾" Round Diameter Alloy Tie Rod, Rock-Flex® Bearing Arms 1-¼" x 2-½", 6" Bell Diameter Ductile Iron Spools, Cast Housing PEER® TILLXTREME™ No Daily Grease Maintenance Bearings, Tie Rod Wrench" 1-¾" Round Diameter Alloy Tie Rod, Rock-Flex® Bearing Arms 1-¼" x 2-½", 6" Bell Diameter Ductile Iron Spools, Cast Housing PEER® TILLXTREME™ No Daily Grease Maintenance Bearings, Tie Rod Wrench" 1-¾" Round Diameter Alloy Tie Rod, Rock-Flex® Bearing Arms 1-¼" x 2-½", 6" Bell Diameter Ductile Iron Spools, Cast Housing PEER® TILLXTREME™ No Daily Grease Maintenance Bearings, Tie Rod Wrench" 1-¾" Round Diameter Alloy Tie Rod, Rock-Flex® Bearing Arms 1-¼" x 2-½", 6" Bell Diameter Ductile Iron Spools, Cast Housing PEER® TILLXTREME™ No Daily Grease Maintenance Bearings, Tie Rod Wrench" 1-¾" Round Diameter Alloy Tie Rod, Rock-Flex® Bearing Arms 1-¼" x 2-½", 6" Bell Diameter Ductile Iron Spools, Cast Housing PEER® TILLXTREME™ No Daily Grease Maintenance Bearings, Tie Rod Wrench" 1-¾" Round Diameter Alloy Tie Rod, Rock-Flex® Bearing Arms 1-¼" x 2-½", 6" Bell Diameter Ductile Iron Spools, Cast Housing PEER® TILLXTREME™ No Daily Grease Maintenance Bearings, Tie Rod Wrench" 1-¾" Round Diameter Alloy Tie Rod, Rock-Flex® Bearing Arms 1-¼" x 2-½", 6" Bell Diameter Ductile Iron Spools, Cast Housing PEER® TILLXTREME™ No Daily Grease Maintenance Bearings, Tie Rod Wrench" 1-¾" Round Diameter Alloy Tie Rod, Rock-Flex® Bearing Arms 1-¼" x 2-½", 6" Bell Diameter Ductile Iron Spools, Cast Housing PEER® TILLXTREME™ No Daily Grease Maintenance Bearings, Tie Rod Wrench" 1-¾" Round Diameter Alloy Tie Rod, Rock-Flex® Bearing Arms 1-¼" x 2-½", 6" Bell Diameter Ductile Iron Spools, Cast Housing PEER® TILLXTREME™ No Daily Grease Maintenance Bearings, Tie Rod Wrench" 1-¾" Round Diameter Alloy Tie Rod, Rock-Flex® Bearing Arms 1-¼" x 2-½", 6" Bell Diameter Ductile Iron Spools, Cast Housing PEER® TILLXTREME™ No Daily Grease Maintenance Bearings, Tie Rod Wrench" 1-¾" Round Diameter Alloy Tie Rod, Rock-Flex® Bearing Arms 1-¼" x 2-½", 6" Bell Diameter Ductile Iron Spools, Cast Housing PEER® TILLXTREME™ No Daily Grease Maintenance Bearings, Tie Rod Wrench" 1-¾" Round Diameter Alloy Tie Rod, Rock-Flex® Bearing Arms 1-¼" x 2-½", 6" Bell Diameter Ductile Iron Spools, Cast Housing PEER® TILLXTREME™ No Daily Grease Maintenance Bearings, Tie Rod Wrench" 1-¾" Round Diameter Alloy Tie Rod, Rock-Flex® Bearing Arms 1-¼" x 2-½", 6" Bell Diameter Ductile Iron Spools, Cast Housing PEER® TILLXTREME™ No Daily Grease Maintenance Bearings, Tie Rod Wrench 1-¾" Round Diameter Alloy Tie Rod, Rock-Flex® Bearing Arms 1-¼" x 2-½", 6" Bell Diameter Ductile Iron Spools, Cast Housing PEER® TILLXTREME™ No Daily Grease Maintenance Bearings, Tie Rod Wrench" 1-¾" Round Diameter Alloy Tie Rod, Rock-Flex® Bearing Arms 1-¼" x 2-½", 6" Bell Diameter Ductile Iron Spools, Cast Housing PEER® TILLXTREME™ No Daily Grease Maintenance Bearings, Tie Rod Wrench 1-¾" Round Diameter Alloy Tie Rod, Rock-Flex® Bearing Arms 1-¼" x 2-½", 6" Bell Diameter Ductile Iron Spools, Cast Housing PEER® TILLXTREME™ No Daily Grease Maintenance Bearings, Tie Rod Wrench" 1-¾" Round Diameter Alloy Tie Rod, Rock-Flex® Bearing Arms 1-¼" x 2-½", 6" Bell Diameter Ductile Iron Spools, Cast Housing PEER® TILLXTREME™ No Daily Grease Maintenance Bearings, Tie Rod Wrench" 1-¾" Round Diameter Alloy Tie Rod, Rock-Flex® Bearing Arms 1-¼" x 2-½", 6" Bell Diameter Ductile Iron Spools, Cast Housing PEER® TILLXTREME™ No Daily Grease Maintenance Bearings, Tie Rod Wrench"
22" x 6 ga Residue Razor® Solid Edge" 24" x ¼" Residue Razor® Solid Edge" 22" x 6 ga Residue Razor® Solid Edge" 24" x ¼" Residue Razor® Solid Edge" 22" x 6 ga Residue Razor® Solid Edge" 24" x ¼" Residue Razor® Solid Edge" 22" x 6 ga Residue Razor® Solid Edge" 24" x ¼" Residue Razor® Solid Edge" 22" x 6 ga Residue Razor® Solid Edge" 24" x ¼" Residue Razor® Solid Edge" 22" x 6 ga Residue Razor® Solid Edge" 24" x ¼" Residue Razor® Solid Edge" 22" x 6 ga Residue Razor® Solid Edge" 24" x ¼" Residue Razor® Solid Edge" 22 x 6 ga Residue Razor® Solid Edge 24" x ¼" Residue Razor® Solid Edge" 22 x 6 ga Residue Razor® Solid Edge 24" x ¼" Residue Razor® Solid Edge" 24" x ¼" Residue Razor® Solid Edge" 24" x ¼" Residue Razor® Solid Edge"
Front 22" - 20"
Rear 22" - 20" - 18" - 16"
Bolt-on Furrow Filler
Front 24" - 22"
Rear 24" - 22" - 20" - 18"
Bolt-on Furrow Filler
Front 22" - 20"
Rear 22" - 20" - 18" - 16"
Bolt-on Furrow Filler
Front 24" - 22"
Rear 24" - 22" - 20" - 18"
Bolt-on Furrow Filler
Front 22" - 20"
Rear 22" - 20" - 18" - 16"
Bolt-on Furrow Filler
Front 24" - 22"
Rear 24" - 22" - 20" - 18"
Bolt-on Furrow Filler
Front 22" - 20"
Rear 22" - 20" - 18" - 16"
Bolt-on Furrow Filler
Front 24" - 22"
Rear 24" - 22" - 20" - 18"
Bolt-on Furrow Filler
Front 22" - 20"
Rear 22" - 20" - 18" - 16"
Bolt-on Furrow Filler
Front 24" - 22"
Rear 24" - 22" - 20" - 18"
Bolt-on Furrow Filler
Front 22" - 20"
Rear 22" - 20" - 18" - 16"
Bolt-on Furrow Filler
Front 24" - 22"
Rear 24" - 22" - 20" - 18"
Bolt-on Furrow Filler
Front 22" - 20"
Rear 22" - 20" - 18" - 16"
Bolt-on Furrow Filler
Front 24" - 22"
Rear 24" - 22" - 20" - 18"
Bolt-on Furrow Filler
Front 22" - 20"
Rear 22" - 20" - 18" - 16"
Bolt-on Furrow Filler
Front 24" - 22"
Rear 24" - 22" - 20" - 18"
Bolt-on Furrow Filler
Front 22" - 20"
Rear 22" - 20" - 18" - 16"
Bolt-on Furrow Filler
Front 24" - 22"
Rear 24" - 22" - 20" - 18"
Bolt-on Furrow Filler
Front 24" - 22"
Rear 24" - 22" - 20" - 18"
Bolt-on Furrow Filler
Front 24" - 22"
Rear 24" - 22" - 20" - 18"
Bolt-on Furrow Filler
5" Hi-Clearance Spring Adjustable Scrapers with Adjustable Blade Scraper at Bearing Arm Locations 5" Hi-Clearance Spring Adjustable Scrapers with Adjustable Blade Scraper at Bearing Arm Locations 5" Hi-Clearance Spring Adjustable Scrapers with Adjustable Blade Scraper at Bearing Arm Locations 5" Hi-Clearance Spring Adjustable Scrapers with Adjustable Blade Scraper at Bearing Arm Locations 5" Hi-Clearance Spring Adjustable Scrapers with Adjustable Blade Scraper at Bearing Arm Locations 5" Hi-Clearance Spring Adjustable Scrapers with Adjustable Blade Scraper at Bearing Arm Locations 5" Hi-Clearance Spring Adjustable Scrapers with Adjustable Blade Scraper at Bearing Arm Locations 5" Hi-Clearance Spring Adjustable Scrapers with Adjustable Blade Scraper at Bearing Arm Locations 5" Hi-Clearance Spring Adjustable Scrapers with Adjustable Blade Scraper at Bearing Arm Locations 5" Hi-Clearance Spring Adjustable Scrapers with Adjustable Blade Scraper at Bearing Arm Locations 5" Hi-Clearance Spring Adjustable Scrapers with Adjustable Blade Scraper at Bearing Arm Locations 5" Hi-Clearance Spring Adjustable Scrapers with Adjustable Blade Scraper at Bearing Arm Locations 5" Hi-Clearance Spring Adjustable Scrapers with Adjustable Blade Scraper at Bearing Arm Locations 5" Hi-Clearance Spring Adjustable Scrapers with Adjustable Blade Scraper at Bearing Arm Locations 5" Hi-Clearance Spring Adjustable Scrapers with Adjustable Blade Scraper at Bearing Arm Locations 5" Hi-Clearance Spring Adjustable Scrapers with Adjustable Blade Scraper at Bearing Arm Locations 5" Hi-Clearance Spring Adjustable Scrapers with Adjustable Blade Scraper at Bearing Arm Locations 5" Hi-Clearance Spring Adjustable Scrapers with Adjustable Blade Scraper at Bearing Arm Locations 5" Hi-Clearance Spring Adjustable Scrapers with Adjustable Blade Scraper at Bearing Arm Locations 5" Hi-Clearance Spring Adjustable Scrapers with Adjustable Blade Scraper at Bearing Arm Locations

Standard equipment

 
Hitch
Hitch levelling
Hydraulics
Depth control
Transport locks and safety
8220-19N 8220-19W 8220-22N 8220-22W 8220-25N 8220-25W 8220-28N 8220-28W 8220-31N 8220-31W 8220-34N 8220-34W 8220-36N 8220-36W 8220-36NQF 8220-36WQF 8220-38NQF 8220-38WQF 8220-41WQF 8220-44WQF
Articulating Ball CAT III, 1-1/2" Pin Articulating Ball CAT III, 1-1/2" Pin Articulating Ball CAT III, 1-1/2" Pin Articulating Ball CAT III, 1-1/2" Pin Articulating Ball CAT III, 1-1/2" Pin Articulating Ball CAT III, 1-1/2" Pin Articulating Ball CAT IV, 2" Pin Articulating Ball CAT IV, 2" Pin Articulating Ball CAT IV, 2" Pin Articulating Ball CAT IV, 2" Pin Articulating Ball CAT IV, 2" Pin Articulating Ball CAT IV, 2" Pin Articulating Ball CAT IV, 2" Pin Articulating Ball CAT IV, 2" Pin Articulating Ball CAT IV, 2" Pin Articulating Ball CAT IV, 2" Pin Articulating Ball CAT IV, 2" Pin Articulating Ball CAT IV, 2" Pin Articulating Ball CAT IV, 2" Pin Articulating Ball CAT IV, 2" Pin
Level-Lift Tongue Level-Lift Tongue Level-Lift Tongue Level-Lift Tongue Level-Lift Tongue Level-Lift Tongue Level-Lift Tongue Level-Lift Tongue Level-Lift Tongue Level-Lift Tongue Level-Lift Tongue Level-Lift Tongue Level-Lift Tongue Level-Lift Tongue Guardian Hitch™ (Cushion Tongue) Guardian Hitch™ (Cushion Tongue) Guardian Hitch™ (Cushion Tongue) Guardian Hitch™ (Cushion Tongue) Guardian Hitch™ (Cushion Tongue) Guardian Hitch™ (Cushion Tongue)
Color-Coded Hydraulic Hose Grips Color-Coded Hydraulic Hose Grips Color-Coded Hydraulic Hose Grips Color-Coded Hydraulic Hose Grips Color-Coded Hydraulic Hose Grips Color-Coded Hydraulic Hose Grips Color-Coded Hydraulic Hose Grips Color-Coded Hydraulic Hose Grips Color-Coded Hydraulic Hose Grips Color-Coded Hydraulic Hose Grips Color-Coded Hydraulic Hose Grips Color-Coded Hydraulic Hose Grips Color-Coded Hydraulic Hose Grips Color-Coded Hydraulic Hose Grips Color-Coded Hydraulic Hose Grips Color-Coded Hydraulic Hose Grips Color-Coded Hydraulic Hose Grips Color-Coded Hydraulic Hose Grips Color-Coded Hydraulic Hose Grips Color-Coded Hydraulic Hose Grips
Single-Point, Crank Style Hydraulic Depth Control Single-Point, Crank Style Hydraulic Depth Control Single-Point, Crank Style Hydraulic Depth Control Single-Point, Crank Style Hydraulic Depth Control Single-Point, Crank Style Hydraulic Depth Control Single-Point, Crank Style Hydraulic Depth Control Single-Point, Crank Style Hydraulic Depth Control Single-Point, Crank Style Hydraulic Depth Control Single-Point, Crank Style Hydraulic Depth Control Single-Point, Crank Style Hydraulic Depth Control Single-Point, Crank Style Hydraulic Depth Control Single-Point, Crank Style Hydraulic Depth Control Single-Point, Crank Style Hydraulic Depth Control Single-Point, Crank Style Hydraulic Depth Control Single-Point, Crank Style Hydraulic Depth Control Single-Point, Crank Style Hydraulic Depth Control Single-Point, Crank Style Hydraulic Depth Control Single-Point, Crank Style Hydraulic Depth Control Single-Point, Crank Style Hydraulic Depth Control Single-Point, Crank Style Hydraulic Depth Control
Hydraulic Valve Wing-Fold and Transport Locks, High Visibility LED Lighting, SMV Sign Hydraulic Valve Wing-Fold and Transport Locks, High Visibility LED Lighting, SMV Sign Hydraulic Valve Wing-Fold and Transport Locks, High Visibility LED Lighting, SMV Sign Hydraulic Valve Wing-Fold and Transport Locks, High Visibility LED Lighting, SMV Sign Hydraulic Valve Wing-Fold and Transport Locks, High Visibility LED Lighting, SMV Sign Hydraulic Valve Wing-Fold and Transport Locks, High Visibility LED Lighting, SMV Sign Hydraulic Valve Wing-Fold and Transport Locks, High Visibility LED Lighting, SMV Sign Hydraulic Valve Wing-Fold and Transport Locks, High Visibility LED Lighting, SMV Sign Hydraulic Valve Wing-Fold and Transport Locks, High Visibility LED Lighting, SMV Sign Hydraulic Valve Wing-Fold and Transport Locks, High Visibility LED Lighting, SMV Sign Hydraulic Valve Wing-Fold and Transport Locks, High Visibility LED Lighting, SMV Sign Hydraulic Valve Wing-Fold and Transport Locks, High Visibility LED Lighting, SMV Sign Hydraulic Valve Wing-Fold and Transport Locks, High Visibility LED Lighting, SMV Sign Hydraulic Valve Wing-Fold and Transport Locks, High Visibility LED Lighting, SMV Sign Hydraulic Valve Wing-Fold and Transport Locks, High Visibility LED Lighting, SMV Sign Hydraulic Valve Wing-Fold and Transport Locks, High Visibility LED Lighting, SMV Sign Hydraulic Valve Wing-Fold and Transport Locks, High Visibility LED Lighting, SMV Sign Hydraulic Valve Wing-Fold and Transport Locks, High Visibility LED Lighting, SMV Sign Hydraulic Valve Wing-Fold and Transport Locks, High Visibility LED Lighting, SMV Sign Hydraulic Valve Wing-Fold and Transport Locks, High Visibility LED Lighting, SMV Sign

Tires/Wheels

 
Center section
Wing section
Wing gauge wheels
8220-19N 8220-19W 8220-22N 8220-22W 8220-25N 8220-25W 8220-28N 8220-28W 8220-31N 8220-31W 8220-34N 8220-34W 8220-36N 8220-36W 8220-36NQF 8220-36WQF 8220-38NQF 8220-38WQF 8220-41WQF 8220-44WQF
Four 280/70 R15, Walking Beams with Slip-In Spindles, 6-Bolt Heavy Duty Hubs Four 280/70 R15, Walking Beams with Slip-In Spindles, 6-Bolt Heavy Duty Hubs Four 280/70 R15, Walking Beams with Slip-In Spindles, 6-Bolt Heavy Duty Hubs Four 280/70 R15, Walking Beams with Slip-In Spindles, 6-Bolt Heavy Duty Hubs Four 280/70 R15, Walking Beams with Slip-In Spindles, 6-Bolt Heavy Duty Hubs Four 280/70 R15, Walking Beams with Slip-In Spindles, 6-Bolt Heavy Duty Hubs Four 340/60 R16.5, Walking Beams with Slip-In Spindles, 8-Bolt Heavy Duty Hubs Four 340/60 R16.5, Walking Beams with Slip-In Spindles, 8-Bolt Heavy Duty Hubs Four 340/60 R16.5, Walking Beams with Slip-In Spindles, 8-Bolt Heavy Duty Hubs Four 340/60 R16.5, Walking Beams with Slip-In Spindles, 8-Bolt Heavy Duty Hubs Four 340/60 R16.5, Walking Beams with Slip-In Spindles, 8-Bolt Heavy Duty Hubs Four 340/60 R16.5, Walking Beams with Slip-In Spindles, 8-Bolt Heavy Duty Hubs Four 340/60 R16.5, Walking Beams with Slip-In Spindles, 8-Bolt Heavy Duty Hubs Four 340/60 R16.5, Walking Beams with Slip-In Spindles, 8-Bolt Heavy Duty Hubs Four 340/60 R16.5, Walking Beams with Slip-In Spindles, 8-Bolt Heavy Duty Hubs Four 340/60 R16.5, Walking Beams with Slip-In Spindles, 8-Bolt Heavy Duty Hubs Four 340/60 R16.5, Walking Beams with Slip-In Spindles, 8-Bolt Heavy Duty Hubs Four 340/60 R16.5, Walking Beams with Slip-In Spindles, 8-Bolt Heavy Duty Hubs Four 380/55 R16.5, Walking Beams with Slip-In Spindles, 8-Bolt Heavy Duty Hubs Four 380/55 R16.5, Walking Beams with Slip-In Spindles, 8-Bolt Heavy Duty Hubs
Two 280/70R-15 per Wing, Walking Beams with Slip-In Spindles, 6-Bolt Hubs Two 280/70R-15 per Wing, Walking Beams with Slip-In Spindles, 6-Bolt Hubs Two 280/70R-15 per Wing, Walking Beams with Slip-In Spindles, 6-Bolt Hubs Two 280/70R-15 per Wing, Walking Beams with Slip-In Spindles, 6-Bolt Hubs Two 280/70R-15 per Wing, Walking Beams with Slip-In Spindles, 6-Bolt Hubs Two 280/70R-15 per Wing, Walking Beams with Slip-In Spindles, 6-Bolt Hubs Two 280/70R-15 per Wing, Walking Beams with Slip-In Spindles, 6-Bolt Hubs Two 280/70R-15 per Wing, Walking Beams with Slip-In Spindles, 6-Bolt Hubs Two 280/70 R15 per Wing, Walking Beams with Slip-In Spindles, 6-Bolt Hubs Two 280/70 R15 per Wing, Walking Beams with Slip-In Spindles, 6-Bolt Hubs Two 280/70 R15 per Wing, Walking Beams with Slip-In Spindles, 6-Bolt Hubs Two 280/70 R15 per Wing, Walking Beams with Slip-In Spindles, 6-Bolt Hubs Two 280/70 R15 per Wing, Walking Beams with Slip-In Spindles, 6-Bolt Hubs Two 280/70 R15 per Wing, Walking Beams with Slip-In Spindles, 6-Bolt Hubs Two 340/60 R16.5 per Wing, Walking Beams with Slip-In Spindles, 8-Bolt Hubs Two 340/60 R16.5 per Wing, Walking Beams with Slip-In Spindles, 6-Bolt Hubs Two 340/60 R16.5 per Wing, Walking Beams with Slip-In Spindles, 8-Bolt Hubs Two 340/60 R16.5 per Wing, Walking Beams with Slip-In Spindles, 6-Bolt Hubs Two 280/70 R15 per Wing, Walking Beams with Slip-In Spindles, 6-Bolt Hubs Two 280/70 R15 per Wing, Walking Beams with Slip-In Spindles, 6-Bolt Hubs
None Two 20.5 x 8 Load Range E None Two 20.5 x 8 Load Range E None Two 20.5 x 8 Load Range E None Two 20.5 x 8 Load Range E Two 20.5 x 8 Load Range E Two 20.5 x 8 Load Range E Two 20.5 x 8 Load Range E Two 20.5 x 8 Load Range E Two 20.5 x 8 Load Range E Two 20.5 x 8 Load Range E Two 20.5 x 8 Load Range E Two 20.5 x 8 Load Range E Two 20.5 x 8 Load Range E Two 20.5 x 8 Load Range E Two 20.5 x 8 Load Range E Two 20.5 x 8 Load Range E

 
KKS-PlaceHolder1
KKS-PlaceHolder4
KKS-PlaceHolder2
KKS-PlaceHolder3
8220-19N 8220-19W 8220-22N 8220-22W 8220-25N 8220-25W 8220-28N 8220-28W 8220-31N 8220-31W 8220-34N 8220-34W 8220-36N 8220-36W 8220-36NQF 8220-36WQF 8220-38NQF 8220-38WQF 8220-41WQF 8220-44WQF
Two 20.5 x 8 Load Range E Two 20.5 x 8 (Kevlar) Two 20.5 x 8 Load Range E Two 20.5 x 8 (Kevlar) Two 20.5 x 8 Load Range E Two 20.5 x 8 (Kevlar) Two 20.5 x 8 Load Range E Two 20.5 x 8 (Kevlar) Two 20.5 x 8 (Kevlar) Two 20.5 x 8 (Kevlar) Two 20.5 x 8 (Kevlar) Two 20.5 x 8 (Kevlar) Two 20.5 x 8 (Kevlar) Two 20.5 x 8 (Kevlar) Two 20.5 x 8 (Kevlar) Two 20.5 x 8 (Kevlar) Two 20.5 x 8 (Kevlar) Two 20.5 x 8 (Kevlar) Two 20.5 x 8 (Kevlar) Two 20.5 x 8 (Kevlar)
None None None None None None None
3 Bar Spike Harrow 3 Bar Spike Harrow 3 Bar Spike Harrow 3 Bar Spike Harrow 3 Bar Spike Harrow 3 Bar Spike Harrow 3 Bar Spike Harrow 3 Bar Spike Harrow 3 Bar Spike Harrow 3 Bar Spike Harrow 3 Bar Spike Harrow 3 Bar Spike Harrow 3 Bar Spike Harrow 3 Bar Spike Harrow 3 Bar Spike Harrow 3 Bar Spike Harrow 3 Bar Spike Harrow 3 Bar Spike Harrow 3 Bar Spike Harrow 3 Bar Spike Harrow
24/7® Soil Conditioning HD Reel with Float Position (Flat Bar or Round Rod) 24/7® Soil Conditioning HD Reel with Float Position (Flat Bar or Round Rod) 24/7® Soil Conditioning HD Reel with Float Position (Flat Bar or Round Rod) 24/7® Soil Conditioning HD Reel with Float Position (Flat Bar or Round Rod) 24/7® Soil Conditioning HD Reel with Float Position (Flat Bar or Round Rod) 24/7® Soil Conditioning HD Reel with Float Position (Flat Bar or Round Rod) 24/7® Soil Conditioning HD Reel with Float Position (Flat Bar or Round Rod) 24/7® Soil Conditioning HD Reel with Float Position (Flat Bar or Round Rod) 24/7® Soil Conditioning HD Reel with Float Position (Flat Bar or Round Rod) 24/7® Soil Conditioning HD Reel with Float Position (Flat Bar or Round Rod) 24/7® Soil Conditioning HD Reel with Float Position (Flat Bar or Round Rod) 24/7® Soil Conditioning HD Reel with Float Position (Flat Bar or Round Rod) 24/7® Soil Conditioning HD Reel with Float Position (Flat Bar or Round Rod) 24/7® Soil Conditioning HD Reel with Float Position (Flat Bar or Round Rod) 24/7® Soil Conditioning HD Reel with Float Position (Flat Bar or Round Rod) 24/7® Soil Conditioning HD Reel with Float Position (Flat Bar or Round Rod) 24/7® Soil Conditioning HD Reel with Float Position (Flat Bar or Round Rod) 24/7® Soil Conditioning HD Reel with Float Position (Flat Bar or Round Rod) 24/7® Soil Conditioning HD Reel with Float Position (Flat Bar or Round Rod) 24/7® Soil Conditioning HD Reel with Float Position (Flat Bar or Round Rod)

OPTIONAL EQUIPMENT

 
Rear hitch
Disc blades
Disc Blades
Levelling
Taper blades
Disc blades wide spacing (9-1/8'')
Finishing attachments
8220-19N 8220-19W 8220-22N 8220-22W 8220-25N 8220-25W 8220-28N 8220-28W 8220-31N 8220-31W 8220-34N 8220-34W 8220-36N 8220-36W 8220-36NQF 8220-36WQF 8220-38NQF 8220-38WQF 8220-41WQF 8220-44WQF
Hydraulic Fore/Aft Adjustable Hydraulic Fore/Aft Adjustable Hydraulic Fore/Aft Adjustable Hydraulic Fore/Aft Adjustable Hydraulic Fore/Aft Adjustable Hydraulic Fore/Aft Adjustable Hydraulic Fore/Aft Adjustable Hydraulic Fore/Aft Adjustable Mechanical Fore/Aft Adjustable Mechanical Fore/Aft Adjustable Mechanical Fore/Aft Adjustable Mechanical Fore/Aft Adjustable Mechanical Fore/Aft Adjustable Mechanical Fore/Aft Adjustable Mechanical Fore/Aft Adjustable Mechanical Fore/Aft Adjustable Mechanical Fore/Aft Adjustable Mechanical Fore/Aft Adjustable Mechanical Fore/Aft Adjustable Mechanical Fore/Aft Adjustable
24" x 6 ga Residue Razor® Solid Edge 24" x 6 ga Residue Razor® Solid Edge 24" x 6 ga Residue Razor® Solid Edge 24" x 6 ga Residue Razor® Solid Edge 24" x 6 ga Residue Razor® Solid Edge 24" x 6 ga Residue Razor® Solid Edge 24" x 6 ga Residue Razor® Solid Edge 24" x 6 ga Residue Razor® Solid Edge 24" x 6 ga Residue Razor® Solid Edge 24" x 6 ga Residue Razor® Solid Edge 24" x 6 ga Residue Razor® Solid Edge
22" x 6 ga Residue Razor® Solid Edge" 22" x 6 ga Residue Razor® Solid Edge" 22" x 6 ga Residue Razor® Solid Edge" 22" x 6 ga Residue Razor® Solid Edge" 22" x 6 ga Residue Razor® Solid Edge" 22" x 6 ga Residue Razor® Solid Edge" 22" x 6 ga Residue Razor® Solid Edge" 22" x 6 ga Residue Razor® Solid Edge" 22" x 6 ga Residue Razor® Solid Edge" 22" x 6 ga Residue Razor® Solid Edge" 22" x 6 ga Residue Razor® Solid Edge"
22" x ¼" Residue Razor® Solid Edge 22" x ¼" Residue Razor® Solid Edge" 22" x ¼" Residue Razor® Solid Edge 22" x ¼" Residue Razor® Solid Edge" 22" x ¼" Residue Razor® Solid Edge 22" x ¼" Residue Razor® Solid Edge" 22" x ¼" Residue Razor® Solid Edge 22" x ¼" Residue Razor® Solid Edge" 22" x 1/4" Residue Razor® Solid Edge 22" x ¼" Residue Razor® Solid Edge" 22" x 1/4" Residue Razor® Solid Edge 22" x ¼" Residue Razor® Solid Edge" 22" x 1/4" Residue Razor® Solid Edge 22" x ¼" Residue Razor® Solid Edge" 22" x ¼" Residue Razor® Solid Edge 22" x ¼" Residue Razor® Solid Edge" 22" x ¼" Residue Razor® Solid Edge 22" x ¼" Residue Razor® Solid Edge" 22" x ¼" Residue Razor® Solid Edge" 22" x ¼" Residue Razor® Solid Edge"
Not Applicable Front 22" - 20",
Rear 22" - 20" - 18" -16",
Bolt-On Furrow Filler
Not Applicable Front 22" - 20",
Rear 22" - 20" - 18" -16",
Bolt-On Furrow Filler
Not Applicable Front 22" - 20",
Rear 22" - 20" - 18" -16",
Bolt-On Furrow Filler
Not Applicable Front 22" - 20",
Rear 22" - 20" - 18" -16",
Bolt-On Furrow Filler
Not Applicable Front 22" - 20",
Rear 22" - 20" - 18" -16",
Bolt-On Furrow Filler
Not Applicable Front 22" - 20",
Rear 22" - 20" - 18" -16",
Bolt-On Furrow Filler
Not Applicable Front 22" - 20",
Rear 22" - 20" - 18" -16",
Bolt-On Furrow Filler
Not Applicable Front 22" - 20",
Rear 22" - 20" - 18" -16",
Bolt-On Furrow Filler
Not Applicable Front 22" - 20",
Rear 22" - 20" - 18" -16",
Bolt-On Furrow Filler
Front 22" - 20",
Rear 22" - 20" - 18" -16",
Bolt-On Furrow Filler
Front 22" - 20",
Rear 22" - 20" - 18" -16",
Bolt-On Furrow Filler
Rear Hitch
(Not for Use with Finishing Attachment)
Rear Hitch
(Not for Use with Finishing Attachment)
Rear Hitch
(Not for Use with Finishing Attachment)
Rear Hitch
(Not for Use with Finishing Attachment)
Rear Hitch
(Not for Use with Finishing Attachment)
Rear Hitch
(Not for Use with Finishing Attachment)
Rear Hitch
(Not for Use with Finishing Attachment)
Rear Hitch
(Not for Use with Finishing Attachment)
Rear Hitch
(Not for Use with Finishing Attachment)
Rear Hitch
(Not for Use with Finishing Attachment)
Rear Hitch
(Not for Use with Finishing Attachment)
Rear Hitch
(Not for Use with Finishing Attachment)
Rear Hitch
(Not for Use with Finishing Attachment)
Rear Hitch
(Not for Use with Finishing Attachment)
Rear Hitch
(Not for Use with Finishing Attachment)
Rear Hitch
(Not for Use with Finishing Attachment)
Rear Hitch
(Not for Use with Finishing Attachment)
Rear Hitch
(Not for Use with Finishing Attachment)
Rear Hitch
(Not for Use with Finishing Attachment)
Rear Hitch
(Not for Use with Finishing Attachment)
24/7® 3-Row 16" Tine Harrow 24/7® 3-Row 16" Tine Harrow 24/7® 3-Row 16" Tine Harrow 24/7® 3-Row 16" Tine Harrow 24/7® 3-Row 16" Tine Harrow 24/7® 3-Row 16" Tine Harrow 24/7® 3-Row 16" Tine Harrow 24/7® 3-Row 16" Tine Harrow 24/7® 3-Row 16" Tine Harrow 24/7® 3-Row 16" Tine Harrow 24/7® 3-Row 16" Tine Harrow 24/7® 3-Row 16" Tine Harrow 24/7® 3-Row 16" Tine Harrow 24/7® 3-Row 16" Tine Harrow 24/7® 3-Row 16" Tine Harrow 24/7® 3-Row 16" Tine Harrow 24/7® 3-Row 16" Tine Harrow 24/7® 3-Row 16" Tine Harrow 24/7® 3-Row 16" Tine Harrow 24/7® 3-Row 16" Tine Harrow

OPERATING INFORMATION

 
Recommended operating speed
Recommended working depth
Recommended tractor power range
8220-19N 8220-19W 8220-22N 8220-22W 8220-25N 8220-25W 8220-28N 8220-28W 8220-31N 8220-31W 8220-34N 8220-34W 8220-36N 8220-36W 8220-36NQF 8220-36WQF 8220-38NQF 8220-38WQF 8220-41WQF 8220-44WQF
4 - 6 / 6 -10 4 - 6 / 6 -10 4 - 6 / 6 -10 4 - 6 / 6 -10 4 - 6 / 6 -10 4 - 6 / 6 -10 4 - 6 / 6 -10 4 - 6 / 6 -10 4 - 6 / 6 -10 4 - 6 / 6 -10 4 - 6 / 6 -10 4 - 6 / 6 -10 4 - 6 / 6 -10 4 - 6 / 6 -10 4 - 6 / 6 -10 4 - 6 / 6 -10 4 - 6 / 6 -10 4 - 6 / 6 -10 4 - 6 / 6 -10 4 - 6 / 6 -10
6" / 15.4 6" / 15.4 6" / 15.4 6" / 15.4 6" / 15.4 6" / 15.4 6" / 15.4 6" / 15.4 6" / 15.4 6" / 15.4 6" / 15.4 6" / 15.4 6" / 15.4 6" / 15.4 6" / 15.4 6" / 15.4 6" / 15.4 6" / 15.4 6" / 15.4 6" / 15.4
7 - 9 PTO HP per Foot 7 - 9 PTO HP per Foot 7 - 9 PTO HP per Foot 7 - 9 PTO HP per Foot 7 - 9 PTO HP per Foot 7 - 9 PTO HP per Foot 7 - 9 PTO HP per Foot 7 - 9 PTO HP per Foot 7 - 9 PTO HP per Foot 7 - 9 PTO HP per Foot 7 - 9 PTO HP per Foot 7 - 9 PTO HP per Foot 7 - 9 PTO HP per Foot 7 - 9 PTO HP per Foot 7 - 9 PTO HP per Foot 7 - 9 PTO HP per Foot 7 - 9 PTO HP per Foot 7 - 9 PTO HP per Foot 7 - 9 PTO HP per Foot 7 - 9 PTO HP per Foot

Media