PROFILE PLUS 2 CL Twin-Auger Mixers

Details of the PROFILE PLUS 2 CL

Your made-to-measure mixer, designed for intensive use

PROFILE PLUS 2 CL mixer wagon with 2 vertical augers, straw-blowing turbine, cross-conveyor distribution and wide tub. Available in 24 to 34 m3 formats, for dairy herds of between 120 and 265 cattle.

Find a distributor near you

Mixer with 2 vertical augers, designed for intensive use.

With capacities starting at 24 m3, ideal for manoeuvring in tight spaces, up to 34 m3 for farmers working on a larger scale, the PROFILE PLUS 2 CL mixer wagons set a whole new standard for mixers.

The PROFILE PLUS 2 CL mixer wagons have been designed to make the most of maximum tub capacity with the lowest height possible. Available in single axle for the 24 to 26 m3 models and in bogie axle for the 28 to 34 m3 models, the PROFILE PLUS 2 CL mixer wagons are built to handle the road.
PROFILE PLUS 2 CL at work

Your benefits

A perfectly even mix for your feed

Exclusive KUHN mixing auger for the PROFILE PLUS mixer wagon

Optional K-NOX technology

To ensure the long-term performance of your PROFILE PLUS 2 CL mixer wagon, the K-NOX auger mixers (optional) are designed to substantially reduce wear and tear caused by abrasion and silage acidity.

It is recognised that the wear and tear which affects the mixing auger over the years will be spread evenly across the whole surface of the mixing coil and also on the central cone. That's why K-NOX mixing augers are built entirely from the same alloy: coil, cone and scraper.

K-NOX is an alloy containing:
- chrome for the advantages of stainless steel providing greater resistance to silage acids,
- ferrites for mechanical resistance and strength in particular when loading heavy products.

The K-NOX technology will increase the resale value of your machine should you decide to sell it. Second-hand mixers are valued based on the wear of the augers, rather than their age. A machine whose main components are still in perfect condition will naturally retain a higher resale value.

Tried and tested transmission and drive systems

The machine transmission is made up of a two-stage bearing, therefore even during breakdown of a whole bale, stress is absorbed.

The combination of the pre-stressed subframe and the solid auger base provides maximum resistance to the load bearing in the bottom of the machine.

The unit is fitted on a collar which reaches up to approximately half the auger height, not directly to the bottom of the tub, thus protecting the transmission from lateral forces exerted on the auger.
Transmission representing KUHN's extensive experience and technological expertise.

20% extra volume!

The mixing tub design, in particular its height/weight ratio, places the PROFILE PLUS 2 CL among the most compact solutions on the market.

The built-in frame reduces overall height, while maintaining excellent ground clearance. For example, the PROFILE PLUS 26 m3 unit stands 3.01 m tall.
The height/width ratio of the PROFILE PLUS range makes these some of the most compact machines on the market

5 load cells: a patented KUHN exclusive!

Precision in small mixtures and accuracy for large tonnages.

The weighing system on the PROFILE 2 DL-CL-PLUS range is designed with load cells integrated into a cradle between the axle and the tub. The load cells are positioned in the direction of travel of the machine, not perpendicularly. None of the constraints related to transport affect the structure of the load cells.

The sensitivity of the 63.50 mm diameter load cells is much better than for 80 mm load cells. Small mixtures (pre-mixes of a few dozen kilograms) will be weighed and managed with greater precision.

The large number of load cells (five in all for the PROFILE 2 DL-CL-PLUS range) improves the weighing accuracy for even the heaviest mixtures (mixtures of fodder and feed with a low percentage of dry matter).
The dimensions of the cells and the patented integration system ensure that the KUHN PROFILE 2 DL/2CL mixers deliver precise weighing for everything from small loads to full loads, with a maximum volume of 34 m3

A flow rate worthy of a KUHN straw blower!

The dimensions of the cells and the patented integration system ensure that the KUHN PROFILE 2 DL/2CL mixers deliver precise weighing for everything from small loads to full loads, with a maximum volume of 34 m3

5 load cells: a patented KUHN exclusive!

Precision in small mixtures and accuracy for large tonnages.

The weighing system on the PROFILE 2 DL-CL-PLUS range is designed with load cells integrated into a cradle between the axle and the tub. The load cells are positioned in the direction of travel of the machine, not perpendicularly. None of the constraints related to transport affect the structure of the load cells.

The sensitivity of the 63.50 mm diameter load cells is much better than for 80 mm load cells. Small mixtures (pre-mixes of a few dozen kilograms) will be weighed and managed with greater precision.

The large number of load cells (five in total for the PROFILE 2 DL-CL-PLUS range) improves the weighing accuracy for even the heaviest mixtures (mixtures of fodder and feed with a low percentage of dry matter).

Optional DATA ADVANCE software for Data Transfer

  • Programming (via cloud communication) from PC or smartphone
  • Editing of ingredients, rations and feed batches from the weighing terminal
  • Editing of the number of animals from the weighing terminal
  • Lists and reports of completed programs with summary of operator discrepancies
  • Multi-user management (admin – users)
  • Monitoring with indicator customisation
  • Data exchange via 3G modem or USB flash drive
  • Calculation of ration costs and dry matter content
  • Stock management
With your KUHN DG600 weighing terminal, your can choose the optional "DTM ADVANCE" software for data transfer

With your weighing terminal, choose your digital assistant!

You can choose one of these digital devices to run the solutions offered along with the weighing terminals. You can take your new assistant with you everywhere! You’ll be able to control your mixer weighing system during loading and feeding, but also from your office.
  • with the indestructible BLACKVIEW BV5900 mobile assistant, you have your weighing system in your pocket!
  • or the all terrain CROSSCALL CORE T-4 mobile assistant for optimal navigation!

KUHN Feed Tracking GOLD also requires the KDW 361 unit.
With the DG600 and DG8000-IC programmable weighing systems, you can choose one of the digital devices to control your mixer weighing system

Two  interfaces to fit how you manage your feed-related information

The 2 applications KUHN Datamix VIEW and KUHN Datamix CONTROL are pre-installed on your weighing assistant. You’re bound to have all your needs met with the easy-to-use secondary display unit (KUHN Datamix VIEW) and the application that lets you program and perform all the functions of your mixer’s weighing unit from your assistant (KUHN Datamix CONTROL). You can access all the weighing data within a communication range of 90 m around your machine. The signal is automatically reset when you re-enter the range.
  • With the KUHN Datamix VIEW, your assistant becomes the secondary display you'll never leave behind!
  • with the KUHN Datamix CONTROL, your assistant becomes the control centre for your machine's weighing system.
Two different interfaces to fit how you manage your feed-related information

Cross-conveyor distribution: maximum visibility

Configure your KUHN PROFILE PLUS mixer wagon to meet your needs, not the other way round!

A wide selection of possible combinations!

For each member of the herd to get their maximum feed intake, the feed-out of the mixed ration must be evenly mixed and distributed across the whole length of the feed passage. It’s important to reduce competition for feed between livestock in the same batch. All animals must get their fair share of quality mixed rations!

When the animals return to the buildings after grazing, providing a homogeneous ration is the best solution to avoid them pushing and shoving for feed.

The PROFILE range features an impressive selection of discharge solutions to ensure distribution of the rations in all the types of buildings. Whether you have sheds with no separate exit, troughs with retaining rims or very narrow feed passages, feeding tables on both sides of the passage requiring simultaneous distribution, or other constraints requiring distribution from the rear of the machine, you will find what you need in the PROFILE PLUS range.

Cross-conveyor: maximum visibility

The cross-conveyor can be positioned at the rear of the PROFILE PLUS range.

Feed can be distributed on the left or right-hand side, as standard. The conveyor is driven by a hydraulic motor at each end guaranteeing perfect operation regardless of the rotation direction.

The PVC belt ensures that fodder doesn’t travel back underneath the belt. The feed passage always remains clean after distribution.

As an option, the cross-conveyor can be hydraulically offset by 250 mm to the left or the right of the machine: ideal for fibrous rations!
Cross-conveyor distribution on the KUHN PROFILE PLUS mixer: left/right distribution as standard

PROFILE PLUS 1 CL at work

Specifications

Technical Characteristics

 
Capacity (m3)
Mixing system
Height of mixing auger (mm)
Max. blowing distance
Minimum PTO power requirement kW (hp)
PTO speed (min-1)
Output mini/maxi (l/min) at 180 bar (pressure required)
Minimum tractor hydraulic requirement
Weight, dimensions and discharge height
PROFILE PLUS 24.2 CL PROFILE PLUS 26.2 CL PROFILE PLUS 28.2 CL PROFILE PLUS 30.2 CL PROFILE PLUS 34.2 CL
24 26 28 30 34
2 vertical augers 2 vertical augers 2 vertical augers 2 vertical augers 2 vertical augers
900 900 1 100 1 100 1 300
On the right up to 18 m On the right up to 18 m On the right up to 18 m On the right up to 18 m On the right up to 18 m
67 (92) > 81 (110) 70 (95) > 85 (115) 73 (100) > 88 (120) 77 (105) > 92 (125) 81 (110) > 95 (130)
540 540 540 540 540
20 - 50 20 - 50 20 - 50 20 - 50 20 - 50
1 SA with free return 1 SA with free return 1 SA with free return 1 SA with free return 1 SA with free return
See table "Technical Specifications" See table "Technical Specifications" See table "Technical Specifications" See table "Technical Specifications" See table "Technical Specifications"

Media