Reliability and time savings
Tine arm drive components are housed in a fully enclosed gearbox casing and require no particular maintenance. The tine arm holders are fixed onto the upper and lower gearbox casing covers making them even more robust.
Tines made from heat treated steel
The tines rake the crop very gently, even when it is heavy and dense. They are made of heat treated steel so their service life is optimised and resistance to fatigue is increased. The “floating” tine attachment, featuring three large-diameter coils, also reduces the risk of wear. The tine height is tightly controlled to preserve both the stubble and the crop.
Top quality raking
Many tine arms
The 9 tine arms on GA 300 GM, GA 3201 G and GA 3201 GM models enable the tools to rake across the whole width. Having a large number of arms is a requirement for top-quality raking. They are in a hyper-tangential position. This means that they reach a 90° angle late in the turning cycle, tine clearance is quick and requires little rotational effort to produce regular, fluffy and straight swaths. The raking is of high quality even at high speeds because the forage is not pushed too far out past the swath.
Swath curtain to adjust the swath width
The swath curtain is mounted on a parallelogram (except GA 300) and is easily adjusted by turning a handle. When extended outwards, the curtain automatically moves to the rear and vice versa. This is very practical as it is always correctly placed in relation to crop flow. No tools are required to set the swath width.
Stable on the road and in the field
Headstock for unrivalled flexibility
GA 300 GM, GA 3201 GM models are available with pivoting headstock so raking and swath quality when turning is just as good as on the straight. What's more, the following baler will be easier to handle in the corners.If your fields are sloping, opt for the GA 3201 G. With its fixed hitch system the rake will always follow the tractor even on the steepest slopes. It is fitted with pivoting wheels too and there is a lever on the wheel to adjust the machine height.
Wheels positioned extremely close to the rotor
The wheels are positioned extremely close to the rotor. As a result the tines follow the ground contours better to avoid impurities getting into the forage.
|Working width (m)|
|Average windrow width (m)|
|Transport width with arms disconnected/connected * (m)|
|Guard unfolding and folding|
|Number of rotors / Rotor diameter (m)|
|Number of tine arms per rotor / Number of tines per tine arm|
|Raking height adjustment|
|Tyres on each rotor|
|Theoretical tractor power requirement (kW/hp)|
|Road lights and signalling|
|Approx. weight (kg)|
|GA 3201 GM||GA 3201 G||GA 300 GM|
|0.80 - 1.00||0.80 - 1.00||0.80|
|Windrow curtain||Windrow curtain||Windrow screen|
|1.75 / -||1.75 / -||- / 2.75|
|To the left||To the left||To the left|
|1 / 2.64||1 / 2.64||1 / 2.64|
|9 / 3||9 / 3||9 / 3|
|Fully enclosed single reduction||Fully enclosed single reduction||Fully enclosed single reduction|
|As optional equipment||As optional equipment|
|Wheels adjustable in height by crank handle||Wheels adjustable in height by adjusting screw||Wheels adjustable in height by crank handle|
|15 x 6.00 - 6||15 x 6.00 - 6||15 x 6.00 - 6|
|3-point Cat. 1 and 2||3-point Cat. 1 and 2||3-point Cat. 1 and 2|
|15 / 20||15 / 20||15 / 20|
|As optional equipment||As optional equipment||As optional equipment|