5635 Field Cultivator silhouette

Maximize Crop Yield Potential

The 5635 field cultivator offers high residue capacity, excellent depth control, plus superior clod sizing and leveling to create the ideal seedbed for your high-value seeds. The 5635 field cultivator is available with working widths ranging from 6.2 m – 15.4 m.

Find a distributor near you

The KUHN 5635 field cultivator, with its 5 rows of shanks, provides the residue flow necessary to work in today's high-yielding cash crop conditions, while shanks on true 15.2 cm spacing and split-the-middle shank pattern ensure that volunteer weeds are removed across the entire width of the machine. Features such as the exclusive floating hitch design and positive stop depth control ensure working depth remains consistent for even germination and uniform emergence.
The KUHN 5635 cultivator at work

Your benefits

Create the Ideal Seedbed

5635_IdealSeedbed.jpg

Create the Ideal Seedbed

  • Mix
    The 5635 field cultivator provides increased residue flow through the five rows of shanks in high residue conditions.
  • Cultivate
    Uniform cultivation with the split-the-middle sweep pattern removes green growth leading to better seed-to-soil contact
  • Enhance Seedbed Condition
    The 24/7 leveling systems create a smooth, level seedbed surface for reduced planter row unit bounce, providing consistent seed spacing and planting depth.

Split-the-Middle Design

  • The first three ranks of shanks till the full sweep width, while the fourth and fifth ranks till the middles creating a split-the-middle sweep pattern
  • Six-inch shank spacing provides maximum tillage action and uniform soil, residue and herbicide mixing
  • Front-to-rear frame clearance of 53.1 cm allows the 5635 field cultivator to handle high volumes of residue.
5635_SplitTheMiddle.png

Floating Hitch

FloatingHitchvsConventionalHitch.jpg

Floating Hitch

The exclusive KUHN floating hitch system precisely gauges tillage depth for rolling terrain resulting in fast, even emergence. Uniform tillage depth creates consistent soil moisture in the seed zone allowing seeds to draw moisture from the surrounding soil at the same rate. This enhances even seedling emergence, which is critical for maximizing yield potential. Conventional hitch designs do not contour to rolling terrain, gouging deeper on hilltops and running too shallow in valleys. This can cause uneven emergence and immediately affects final yield potential.

Floating Hitch Advantages

The KUHN floating hitch features up to 57% fewer wear points than conventional designs. Fewer moving parts mean less chance for a breakdown during the critical seedbed preparation season. In field position, the 5635 contours over rolling ground conditions, then transforms to a rigid, self-leveling style when raised to transport position. The floating hitch system raises the gauge wheels off the ground during transport. This provides greater machine stability and control as compared to conventional floating hitch designs. Conventional designs generally produce “caster wobble” and may become unstable during transport, especially at high speeds.
5635_FloatingHitchAdvantages.jpg

Shank and Leveling Choices

ShankChoices.png

Shank Mount and Shank Options

With a variety of shank and mount options, KUHN 5635 field cultivators can be configured to meet your agronomic needs.

24/7 Leveling Systems

KUHN offers a variety of harrows to meet your specific soil and residue requirements. These harrows are available for all sizes and provide time saving features to increase overall productivity.
LevelingChoices.png

Equipment

5635 _50_Action_01.jpg

Specifications

DIMENSIONS

 
A Transport Width (3-Section)
C Transport Height (3-Section)
5635-20 5635-22 5635-24 5635-26 5635-28
13'3" / 4.0 13'3" / 4.0" 13'3" / 4.0" 13'3" / 4.0" 15'3" / 4.6"
10' / 3.0 10'7" / 3.2 11'6" / 3.5 12'10" / 3.9 12'10" / 3.9

SPECIFICATIONS

 
Frame Type
Number of shanks
Shank spacing
Working width
Approx. weight (w/K-tine shank)
Approx. weight (w/spring shank)
5635-20 5635-22 5635-24 5635-26 5635-28
3-Section 3-Section 3-Section 3-Section 3-Section
41 45 49 53 57
6" / 15.2" 6" / 15.2" 6" / 15.2" 6" / 15.2" 6" / 15.2"
20'6" / 6.2 22'6" / 6.9 24'6"/ 7.5 26'6" / 8.1 28'6 " / 8.7
7,999 / 3 628 8,106 / 3 676 8,289 / 3 759 8,912 / 4 042 9,361 / 4 246
8,877 / 4 026 9,069 / 4 113 9,339 / 4 236 10,047 / 4 557 10,582 / 4 799

Standard equipment

 
Hitch clevis
Hydraulics
Transport locks and safety
5635-20 5635-22 5635-24 5635-26 5635-28
CAT III Cast Clevis (1-1/2" pin) & Combination "C" Cast Clevis (1-1/4" pin) Hitch CAT III Cast Clevis (1-1/2" pin) & Combination "C" Cast Clevis (1-1/4" pin) Hitch CAT III Cast Clevis (1-1/2" pin) & Combination "C" Cast Clevis (1-1/4" pin) Hitch CAT III Cast Clevis (1-1/2" pin) & Combination "C" Cast Clevis (1-1/4" pin) Hitch CAT IV Ball Style Cast Clevis Hitch (2" Pin)
All Cylinders and Hoses, Rephasing 10" Lift Cylinders All Cylinders and Hoses, Rephasing 10" Lift Cylinders All Cylinders and Hoses, Rephasing 10" Lift Cylinders All Cylinders and Hoses, Rephasing 10" Lift Cylinders All Cylinders and Hoses, Rephasing 10" Lift Cylinders
Hydraulic Valves, Transport and Wing Fold, Slow Moving Vehicle Sign, High Visibility LED Lighting Hydraulic Valves, Transport and Wing Fold, Slow Moving Vehicle Sign, High Visibility LED Lighting Hydraulic Valves, Transport and Wing Fold, Slow Moving Vehicle Sign, High Visibility LED Lighting Hydraulic Valves, Transport and Wing Fold, Slow Moving Vehicle Sign, High Visibility LED Lighting Hydraulic Valves, Transport and Wing Fold, Slow Moving Vehicle Sign, High Visibility LED Lighting

STANDARD EQUIPMENT

 
Hitch type
5635-20 5635-22 5635-24 5635-26 5635-28
Self-leveling Hitch Self-leveling Hitch Self-leveling Hitch Self-leveling Hitch Self-leveling Hitch

Standard Equipment

 
Depth control
5635-20 5635-22 5635-24 5635-26 5635-28
Hydraulic Depth Control with positive stop Hydraulic Depth Control with positive stop Hydraulic Depth Control with positive stop Hydraulic Depth Control with positive stop Hydraulic Depth Control with positive stop

Tires/Wheels

 
Main frame
Wing frame
5635-20 5635-22 5635-24 5635-26 5635-28
R280/70R15" Fl, 6-Bolt Hubs" R280/70R15" Fl, 6-Bolt Hubs" R280/70R15" Fl, 6-Bolt Hubs" R280/70R15" Fl, 6-Bolt Hubs" R280/70R15" Fl, 6-Bolt Hubs"
Four 280/70R15, 6-Bolt Hubs, Two Front Castering Gauge Wheels 20.5" x 8" Load Range E" Four 280/70R15, 6-Bolt Hubs, Two Front Castering Gauge Wheels 20.5" x 8" Load Range E" Four 280/70R15, 6-Bolt Hubs, Two Front Castering Gauge Wheels 20.5" x 8" Load Range E" Four 280/70R15, 6-Bolt Hubs, Two Front Castering Gauge Wheels 20.5" x 8" Load Range E" Four 280/70R15, 6-Bolt Hubs, Two Front Castering Gauge Wheels 20.5" x 8" Load Range E"

OPTIONAL EQUIPMENT

 
24/7 Levelling systems
Hitch
Shanks - Mounts
Lower shanks
Sweeps
Tyre / Wheels on wings
Five-row spike tooth harrow
Finishing attachments
Finishing attachments
Finishing attachments
5635-20 5635-22 5635-24 5635-26 5635-28
Three-Row Tine and Spiral HD Reel Combination with 11" Diameter Spiral, Round Bar HD Reel equipped with PEER® TILLXTREME™ Maintenance Free Bearings Three-Row Tine and Spiral HD Reel Combination with 11" Diameter Spiral, Round Bar HD Reel equipped with PEER® TILLXTREME™ Maintenance Free Bearings Three-Row Tine and Spiral HD Reel Combination with 11" Diameter Spiral, Round Bar HD Reel equipped with PEER® TILLXTREME™ Maintenance Free Bearings Three-Row Tine and Spiral HD Reel Combination with 11" Diameter Spiral, Round Bar HD Reel equipped with PEER® TILLXTREME™ Maintenance Free Bearings Three-Row Tine and Spiral HD Reel Combination with 11" Diameter Spiral, Round Bar HD Reel equipped with PEER® TILLXTREME™ Maintenance Free Bearings
Floating Hitch Floating Hitch Floating Hitch Floating Hitch Floating Hitch
Two Piece K-Tine 180 lb Two Piece K-Tine 180 lb Two Piece K-Tine 180 lb Two Piece K-Tine 180 lb Two Piece K-Tine 180 lb
25" Underframe Clearance, 1-3/4" x 5/8" Lower Shank, Flat or Edge-On Style 25" Underframe Clearance, 1-3/4" x 5/8" Lower Shank, Flat or Edge-On Style 25" Underframe Clearance, 1-3/4" x 5/8" Lower Shank, Flat or Edge-On Style 25" Underframe Clearance, 1-3/4" x 5/8" Lower Shank, Flat or Edge-On Style 25" Underframe Clearance, 1-3/4" x 5/8" Lower Shank, Flat or Edge-On Style
7"/17.7 Sweeps for 6" / 15.2 Spacing 7"/17.7 Sweeps for 6" / 15.2 Spacing 7"/17.7 Sweeps for 6" / 15.2 Spacing 7"/17.7 Sweeps for 6" / 15.2 Spacing 7"/17.7 Sweeps for 6" / 15.2 Spacing
280/70R15 or 240/80R15, 6-Bolt 280/70R15 or 240/80R15, 6-Bolt 280/70R15 or 240/80R15, 6-Bolt 280/70R15 or 240/80R15, 6-Bolt 280/70R15 or 240/80R15, 6-Bolt
Three-Row Spike Harrow and Spiral HD Reel Combination with 11" Diameter Spiral, Flat Bar or Round Bar HD Reel equipped with PEER® TILLXTREME™ Maintenance Free Bearings" Three-Row Spike Harrow and Spiral HD Reel Combination with 11" Diameter Spiral, Flat Bar or Round Bar HD Reel equipped with PEER® TILLXTREME™ Maintenance Free Bearings" Three-Row Spike Harrow and Spiral HD Reel Combination with 11" Diameter Spiral, Flat Bar or Round Bar HD Reel equipped with PEER® TILLXTREME™ Maintenance Free Bearings" Three-Row Spike Harrow and Spiral HD Reel Combination with 11" Diameter Spiral, Flat Bar or Round Bar HD Reel equipped with PEER® TILLXTREME™ Maintenance Free Bearings" Three-Row Spike Harrow and Spiral HD Reel Combination with 11" Diameter Spiral, Flat Bar or Round Bar HD Reel equipped with PEER® TILLXTREME™ Maintenance Free Bearings"
Four-Row Coil Tine Harrow, 2-1/2" Overall Spacing" Four-Row Coil Tine Harrow, 2-1/2" Overall Spacing" Four-Row Coil Tine Harrow, 2-1/2" Overall Spacing" Four-Row Coil Tine Harrow, 2-1/2" Overall Spacing" Four-Row Coil Tine Harrow, 2-1/2" Overall Spacing"
Five-Row Spike Tooth Harrow 3/4" x 11" Spikes, 1-1/2" Overall Spacing Five-Row Spike Tooth Harrow 3/4" x 11" Spikes, 1-1/2" Overall Spacing Five-Row Spike Tooth Harrow 3/4" x 11" Spikes, 1-1/2" Overall Spacing Five-Row Spike Tooth Harrow 3/4" x 11" Spikes, 1-1/2" Overall Spacing Five-Row Spike Tooth Harrow 3/4" x 11" Spikes, 1-1/2" Overall Spacing
No Attachment No Attachment No Attachment No Attachment No Attachment

PLACEHOLDERS

 
KKS-PlaceHolder8
5635-20 5635-22 5635-24 5635-26 5635-28
Three-Row Tine and Spiral HD Reel Combination with 11" Diameter Spiral, Flat Bar HD Reel equipped with PEER® TILLXTREME™ Maintenance Free Bearings" Three-Row Tine and Spiral HD Reel Combination with 11" Diameter Spiral, Flat Bar HD Reel equipped with PEER® TILLXTREME™ Maintenance Free Bearings" Three-Row Tine and Spiral HD Reel Combination with 11" Diameter Spiral, Flat Bar HD Reel equipped with PEER® TILLXTREME™ Maintenance Free Bearings" Three-Row Tine and Spiral HD Reel Combination with 11" Diameter Spiral, Flat Bar HD Reel equipped with PEER® TILLXTREME™ Maintenance Free Bearings" Three-Row Tine and Spiral HD Reel Combination with 11" Diameter Spiral, Flat Bar HD Reel equipped with PEER® TILLXTREME™ Maintenance Free Bearings"

OPERATING INFORMATION

 
Recommended operating speed
Recommended working depth
Recommended tractor power range
5635-20 5635-22 5635-24 5635-26 5635-28
5 - 7.5 / 8 - 12 5 - 7.5 / 8 - 12 5 - 7.5 / 8 - 12 5 - 7.5 / 8 - 12 5 - 7.5 / 8 - 12
6" / 15.2 Maximum Working Depth 6" / 15.2 Maximum Working Depth 6" / 15.2 Maximum Working Depth 6" / 15.2 Maximum Working Depth 6" / 15.2 Maximum Working Depth
6 - 8 PTO hp per Foot 6 - 8 PTO hp per Foot 6 - 8 PTO hp per Foot 6 - 8 PTO hp per Foot 6 - 8 PTO hp per Foot

Media