A practical finish
The PF sprayer has a compact design, giving the operator excellent visibility of the front of the tractor. The needle gauge, easily visible from the cab, indicates the volume.
The PF sprayer is not just a front tank, it's a real comprehensive and independent sprayer with its clever 3-tank assembly, its practical finish or its simple operation.
Combined with a KUHN rear sprayer, the PF sprayer increases the work capacity for higher spraying work autonomy. With a single transfer tube, managing the whole unit is easier!
PF sprayers equipped with a pump are designed to accommodate an autonomous kit. The latter is positioned on the rear tool and allows spraying or fertilizing up to 20 rows. The application can be localized on the row or in-between rows.
Your benefits
Designed as a true sprayer
Tanks with centralised filling
The clever assembly of the three PF tanks not only provides compact dimensions but also centralises the filling of the tanks and makes it accessible from the front of the sprayer. In the resupply version (PF SELECT), the main tank and the rinsing tank can be combined to reach an available volume of 1,350 litres or 1,850 litres. The sprayer also features two storage compartments at the front.
MANUSET set up
With the MANUSET manual set-up system, you're in total control when preparing the spray solution! The intuitive controls are centralised on the left-hand side of the sprayer.
DILUSET+ set-up
With the DILUSET+ set-up system, the two main control valves are motorised. Agitation and rinsing are controlled directly from the cab. The set-up system features a dual control to monitor the suction valve from the PF sprayer.
A built-in pump
The electric drive pump (22L/min) ensures proper mixing of the solution and rinsing of the main tank at the end of spraying operations. Two other models of hydraulic drive pumps are also available and can increase the flow rate to 75 or 125 L/min. The sprayer can be filled independently and paired with an autonomous spraying kit.
A single tube is simpler!
A single tube is simpler!
The two sprayers (rear and PF) are connected by a single tube which can be used for filling, transferring the spray solution and draining residues after rinsing. Thanks to CAM-LOCK fittings, the connections are quick and easy.
Easier filling
The main tank can be filled in two ways: through the rear sprayer, which allows for precise control of the filling volume and uses the induction bowl to mix and transfer the spray solution to the front, or through the PF sprayer pump, using the induction strainer.
Clean water? One product? Two products? You decide!
The combination of the PF front-mounted sprayer unit and DELTIS 2 or ALTIS 2 sprayer unit at the rear offers several options: a single total volume or 2 capacities with 2 different products. With the PF SELECT version, the PF sprayer can also be used to supply clean water or liquid nitrogen.
Tank management
During spraying operations, no additional control box is needed to manage the tanks. Simply press the rear sprayer terminal, and the pump will switch the suction from the rear tank to the front tank. This makes draining the tanks and balancing the load on the tractor effortless.
Autonomous fertilisation and spraying kit for PF
Even more possibilities!
The PF sprayers equipped with a pump are set up to accommodate an autonomous kit as a standard option. The kit is mounted on the rear tool and can spray or fertilise up to 20 rows. The solution can be applied on the rows or in-between rows.
Electronic ground speed related application rate regulation
The RPB control box is easy to install in the cab, thanks to its compact design. It adjusts the amount of liquid applied based on the tractor's ground speed. It constantly displays key information on the screen, such as application rate, pressure and speed.
Save time, fuel and product
Carry out two operations in a single pass with localised fertilisation or spraying. What's more, you can use row application or band application to reduce the dose of product applied.
Equipment
Numerous optional equipment is available for providing operational comfort of use or to meet all needs.
Specifications
General characteristics
| Tank capacity (L) |
|---|
| Tank material |
| Real tank capacity (L) |
| Rinsing tank capacity (L) |
| Type of pump |
| Pump output (L/min) |
| Maximum pressure (bar) |
| Filtration |
| Box |
| Transfer hose |
| Overall width (m) |
| Transport height (m) |
| Type of regulation |
| Type of distribution |
| Manometer |
| Filtration |
| Distribution |
| Overall width (m) |
| PF | PF SELECT | AUTONOMOUS KIT |
|---|---|---|
| 1000 / 1500 | 1000 / 1500 | |
| Polyethylen | Polyethylen | |
| 1160 / 1660 | 1160 / 1660 | |
| 190 | 190 | |
| 12V or diaphragm pump PM 75 / 125 - hydraulic drive | ||
| 22 - 75 or 125 | ||
| 2.5 bar with 12V - 7 bar with PM | ||
| Two level of filtration - filling / suction | Single level of filtration - filling | |
| RPB | ||
| Pressure (10m) + Return (10m) | ||
| 2.41 | 2.41 | |
| 1,25 (1000l) - 1,51 (1500l) | 1,25 (1000l) - 1,51 (1500l) | 0.70 |
| DPAE | ||
| Motorised valve | ||
| Automatic 3 point EASY HITCH - cat II | ||
| Single level of filtration - spraying | ||
| from 1 (25mm) to 24 (8mm) | ||
| 0.40 |
Media
