PZ 3015 silhouette

A sophisticated solution for challenging conditions

Suitable for medium and large-sized farms, the PZ 3015 is designed for excellent ground following and top mowing performance, even in the most challenging conditions. Improve the quality of your forage and reduce downtime by using the exclusive LIFT-CONTROL suspension system.

Find a distributor near you

The PZ 3015 rear-mounted drum mower is based on a sophisticated headstock design - along with the typical PZ knife plate layout. The mower is equipped with modern solutions to meet tomorrow’s demands: LIFT-CONTROL mower suspension, a unique and efficient knife changing system for quick knife exchange and an optional parking stand for vertical storage to optimise floor space.
The new KUHN design includes a redesigned and patented* FLEXPROTECT flexible side cover to minimise potential damage.
PZ 3015 drum mower at work

Your benefits

Cleverly designed components for optimal performance

Flat sided drums

Flat sided drums

Round drums do not transport well, that is why KUHN uses drums with two flat sides for optimal crop transport without the risk of blockages. Movement of the crop has an impact on the mowing quality. It is for this reason that KUHN has chosen to use exchangeable transport strips.

Height adjustment

The cutting height can be adjusted by adding or removing the optional spacers. This can be easily reached and infinitely adjusted.
Cutting height adjustment

Freely rotating saucers

The freely rotating saucers have a major advantage. In uneven ground conditions, the saucer 'rotates' over the ground rather than sliding, thus protecting the stubble and reducing PTO power requirement. The positive effects of reduced crop contamination will be particularly noticeable on sensitive soils such as boggy land.
The saucers of the drum mower can rotate freely

Quick knife exchange

Using the special tool, you can push the knife holder down and simply replace the knifes. It is a quick and secure system.
Using a hook shaped tool, you can simply replace the knifes.

Perfect swath formation

The proven design with its uneven sized diameter knife plates has great benefits for the front mower: a clean swath formation, less crop contamination, perfect ground following and high throughput with a low PTO power requirement.
The arrangement of the drums has the added advantage that it is fuel-saving. Swath discs are available as an option.
The uneven sized diameter knife plates create a clean swath formation.

Safety and comfort when you need it

On encountering any obstacles, the material of the side cover bends, without breaking or damaging the mower.

FLEXPROTECT side covers

Damage to the side covers is now a thing of the past. The KUHN FLEXPROTECT flexible side covers add a new dimension to these mowers with their design made of polythene. On encountering any obstacles, the material of the side cover bends, without breaking or damaging the mower. The material then returns back to its original shape.

LIFT-CONTROL

The LIFT-CONTROL hydro-pneumatic suspension system continually ensures a uniform ground pressure and a lower pulling power requirement. The system minimises crop contamination and maximises stubble preservation. The combination of the trailed
linkage geometry and LIFT-CONTROL creates a safety breakaway system for superior machine protection and non-stop mowing.
LIFT-CONTROL is a hydro-pneumatic suspension system with a nitrogen accumulator replacing the traditional spring.

Maximum operator comfort

All features on the PZ 3015 are designed for maximum operator comfort. The sophisticated headstock design ensures easy folding and unfolding and a safe road transport. Easy access and cleaning is offered by the foldable side guards. The side cover lock is simple and effective in both work and service position.
All features are designed for maximum operator comfort.

Easy access to the drums

The front cover can be folded away, allowing easy access to the blades. This is perfect for daily inspections and mower maintenance.
The foldable front and side protective covers can be lifted upwards, convenient for daily inspection and blade exchange.

Parking stand for vertical storage

The PZ 3015 comes with an optional parking stand for vertical storage to 3.6m. This is useful to optimise storage space.
The PZ 3015 comes with an optional parking stand for vertical storage.

Quick and easy maneuverability

The PZ 3015 mower articulates for excellent ground contour following on uneven terrains

Articulation

The trailed linkage geometry of the PZ 3015 headstock provides excellent ground following in all circumstances, even on slopes and banks up to 25°.

Road transport

For stable transport the machine has a folding transport position of 128°, the weight of the machine is placed more evenly between the rear wheels. This increases the safety and comfort in transport significantly and the tractor lights are always visible. The trailed linkage geometry enables a low transport height of 3.6 m, with a ground clearance of 0,5 m.
For stable transport the machine has a transport position of 128°, the weight of the machine is placed more evenly between the rear wheels.

PZ 3015 drum mower with Massey Ferguson tractor working in long grass

Specifications

Technical characteristics

 
Working width (m)
Overlap with front mower (cm)
3-point linkage
PTO speed (min-1)
Minimum required tractor hydraulic connections
Minimum PTO power requirement kW(hp)
Transport position
Headland position
Headland cylinder
Suspension
Ground pressure compensation
Safety breakaway system
PTO shaft
Number of drums
Number of blades
Cutting height adjustment
Cutting height range (mm)
Average swath width ca. (m)
Warning signs and lighting set
Weight min - max (kg)
PZ 3015
3,04
27
(in combination with 3,04 m front mower)
cat. 2
1000
1 single and 1 double acting valve with floating position
55(75)
hydraulic folding 128° vertically
hydraulically
as standard
centrally
hydro-pneumatic
hydraulic “LIFT-CONTROL”
1 3/8'' 6 spline with slip clutch protect, freewheel integrated in mowing unit gearbox
4
12
spacers 4 mm steps
44
1,30
as standard
940 - 1000

Media