Vertical tillage system EXCELERATOR 8005

EXCELERATOR 8005 silhouette

Designed for TRUE Vertical Tillage

With 8 models ranging in working widths, between 3.4 m - 15.2 m, the EXCELERATOR 8005 provides exceptional residue cutting, soil and residue mixing and seedbed preparation in one pass, utilizing an exclusive 4-step process.

Find a distributor near you

The KUHN EXCELERATOR vertical tillage system provides exceptional residue cutting, soil and residue mixing and seed bed preparation in one pass, utilizing an exclusive 4-step process. True vertical tillage delivers residue cutting and soil mixing without soil shearing or smearing in the critical zone for seed placement and young seedling root development. With its unique Excalibur VT (vertical tillage) blades, designed to meet the challenges of cutting tough GMO residue, you can be confident that the residue management achieved during fall operation will allow maximum residue decomposition over winter. In addition, spring operation will accomplish your goals of superior seedbed preparation in high residue situations. 

The KUHN CCX 9000 cover crop seeder, for use on Excelerator models (31.35 m - 10.36 m), provides you with the ability to establish a cover crop while performing vertical tillage – saving you time and money!
Excelerator8005Action_04_MAW.jpg

Your benefits

Exclusive 4-Step Process

4StepProcess_8005.png

Exclusive 4-Step Process

  1. Capture and Slice
    Excalibur VT (Vertical Tillage) blades, with their distinctive scalloped edge, capture and slice residue into planter-manageable sizes. This exclusive, 32-flute design easily penetrates soil, creates small clod size and begins the soil and residue mixing process.
  2. Cut and Remove
    In this high-speed process, adjustable gang angles with Excalibur VT blades (on 20.3 cm spacing), remove the maximum amount of uncut soil at shallow depth settings, while minimizing furrowing and ridging for a smooth field finish. The adjustable gang angle gives you the choice to move soil laterally or to leave more residue.
  3. Mix and Anchor
    Exclusive to KUHN, rotary Star Wheel™ treaders aggressively mix soil and residue, pulverize large clods, remove soil from disturbed root balls and anchor residue into the soil surface.
  4. Size and Firm
    The proven 24/7 soil conditioning reel delivers clod sizing and firming for this high-speed operation.

Manage Residue

Excelerator_AdjustableGangAngle.jpg

Adjustable Gang Angles

Soil movement and residue mixing are varied by adjusting the gangs from 1° (maximum residue retention) to 5° (maximum soil movement, leveling and residue mixing). Hydraulic gang angle adjustment is available as an option. Excalibur VT blades are designed to wear on both sides of the blade at these settings, maintaining a sharp edge over time. These shallow angles prevent soil roll and inversion, distinguishing the Excelerator’s performance from competitive units based on older disc harrow technology with typical gang angles from 10° to 22°.

Excalibur VT Blade Spacing

The second gang of Excalibur VT blades are indexed to the front 20.3 cm spaced blades to remove the maximum amount of uncut soil at shallow depth settings. This provides uniform tillage without smearing or compacting the critical seed zone required for consistent seedling root development. During this process, soil and residue are lifted above the surface and propelled by the fluted blades into the next step of this exceptional vertical tillage process. The unique design of the Excalibur VT blades minimizes furrowing and ridging, leaving a smooth field pass-to-pass.
BladeSpacing.png

Quality Finishing

Excelerator_StarWheels_02.jpg

Exclusive Star Wheel™ Treaders

Aggressively mix soil and residue, pulverize large clods, level and anchor residue into the soil surface. This action protects residue from blowing winds or washing rains, and begins the decomposition of residue into valuable organic matter.

 The Star Wheel treaders assist in breaking out any remaining uncut soil between blade paths providing a smooth, even surface for planter row units to place seeds consistently in the seed zone. Constant flow hydraulic-adjustable gangs are spring cushioned to contour over varying field conditions, evenly distributing residue across the soil surface for a uniform finish.

Heavy-Duty 24/7 Conditioning Reel

The proven 24/7 soil conditioning reel delivers clod sizing and firming for this high-speed operation. The 24/7 reel also offers the convenience of “floating” with a simple in-field adjustment, allowing continued operation in higher soil moisture conditions. Two heavy-duty reel options are available. Choose flat blades for maximum clod sizing in hard soil conditions or round bars for increased soil firming in loamy soil conditions, this effective component completes a superior finish to any field.
Reels_HDRound_HDFlat.png

Equipment

KUHN EXCELERATOR 8005 at work

Specifications

DIMENSIONS

 
B Transport Height
A Transport Width
8005-11 8005-14 8005-20 8005-25 8005-30 8005-34 8005-40 8005-50
6'5" / 2.0" 6'5" / 2.0" 10'9" / 3.2" 12'9" / 3.8" 13'6" / 4.1" 14'9" / 4.50" 12'5" / 3.8 14'9" / 4.5"
12'9" / 3.8" 15'3" / 4.7" 12'2" / 3.7" 12'2" / 3.7" 15'3" / 4.6" 18'0" / 5.49" 19' / 5.8 19'4" / 5.88"

SPECIFICATIONS

 
Blade spacing
Number of blades
Working width
Approximate weight (lb /kg)
8005-11 8005-14 8005-20 8005-25 8005-30 8005-34 8005-40 8005-50
8" / 20.3 8" / 20.3 8" / 20.3 8" / 20.3 8" / 20.3 8"/ 20.3 8" / 20.3 8" / 20.3
37 45 65 77 93 105 121 153
11' / 3.6 14' / 4.3 20' / 6.1 25' / 7.6 30' / 9.1 34' / 10.4 40' / 12.2 50' / 15.2
9,200 / 4 173 11,150 / 5 058 17,000 / 7 711 19,800 / 8 981 23,170 / 10 510 27,930 / 12 669 32,500 / 14 741 43,100 / 19 550

OPTIONAL EQUIPMENT

 
Gang angle
Hitch
Excalibur blades
24/7 conditioning reel
Hitch
Gauge wheels
Gauge Wheels
Star wheel treaders
Gauge Wheels
24/7® Conditioning Reel
Rear hitch
Gang Angle Adjustment
8005-11 8005-14 8005-20 8005-25 8005-30 8005-34 8005-40 8005-50
Adjustable 1 to 5 Degrees Adjustable 1 to 5 Degrees Adjustable 1 to 5 Degrees Adjustable 1 to 5 Degrees Hydraulic Adjustment 1 to 5 Degrees Hydraulic Adjustment 1 to 5 Degrees Hydraulic Adjustment 1 to 5 Degrees Adjustable 1 to 5 Degrees
Mechanical Fore / Aft Adjustment, Level - Lift Tongue Mechanical Fore / Aft Adjustment, Level - Lift Tongue Mechanical Fore / Aft Adjustment, Level - Lift Tongue Mechanical Fore / Aft Adjustment, Level - Lift Tongue Standard Mechanical Level Lift, Optional Guardian Hitch™ Mechanical Fore / Aft Adjustment, Level - Lift Tongue Guardian Hitch™ (Cushion Tongue) with Mechanical  Fore / Aft Adjustment, Level-Lift Tongue Guardian Hitch™ (Cushion Tongue) with Mechanical  Fore / Aft Adjustment, Level-Lift Tongue
Excalibur® VT Blades - 22" Diameter, 6 mm, 32 Flute, Reversed Crimped Center" Excalibur® VT Blades - 22" Diameter, 6 mm, 32 Flute, Reversed Crimped Center" Excalibur® VT Blades - 22" Diameter, 6 mm, 32 Flute, Reversed Crimped Center" Excalibur® VT Blades - 22" Diameter, 6 mm, 32 Flute, Reversed Crimped Center" Excalibur® VT Blades - 22" Diameter, 6 mm, 32 Flute, Reversed Crimped Center" Excalibur® VT Blades - 22" Diameter, 6 mm, 32 Flute, Reversed Crimped Center" Excalibur® VT Blades - 22" Diameter, 6 mm, 32 Flute, Reversed Crimped Center" Excalibur® VT Blades - 22" Diameter, 6 mm, 32 Flute, Reversed Crimped Center"
Round Spiral Rod HD Reels, No Daily Grease Maintenance Bearings Round Spiral Rod HD Reels, No Daily Grease Maintenance Bearings Round Spiral Rod HD Reels, No Daily Grease Maintenance Bearings Round Spiral Rod HD Reels, No Daily Grease Maintenance Bearings Round Spiral Rod HD Reels, No Daily Grease Maintenance Bearings Round Spiral Rod HD Reels, No Daily Grease Maintenance Bearings Round Spiral Rod HD Reels, No Daily Grease Maintenance Bearings Round Spiral Rod HD Reels, No Daily Grease Maintenance Bearings
Not Applicable Not Applicable Not Applicable Not Applicable Guardian Hitch™ (Cushion Tongue) with Mechanical Fore / Aft Adjustment, Level-Lift Tongue Guardian Hitch™ (Cushion Tongue) with Mechanical Fore / Aft Adjustment, Level-Lift Tongue Not Applicable Not Applicable
Not Applicable Not Applicable Not Applicable Two Front Castering 20.5" x 8 Load Range E" Two Front Castering 20.5" x 8 Load Range E" Two Front Castering 20.5" x 8 Load Range E" Four Front Castering 20.5" x 8 Load Range E" Four Front Castering 20.5" x 8 Load Range E"
Not Applicable Not Applicable Not Applicable Two Front Castering 20.5" x 8 Kevlar Two Front Castering 20.5" x 8 Kevlar Two Front Castering 20.5" x 8 Kevlar Four Front Castering 20.5" x 8 Kevlar Four Front Castering 20.5" x 8 Kevlar
Spring Cushion Gangs, Mechanical Adjustable Spring Cushion Gangs, Mechanical Adjustable Spring Cushion Gangs, Mechanical Adjustable Spring Cushion Gangs, Mechanical Adjustable Not Applicable Not Applicable Not Applicable Not Applicable
None None None None None None None None
Flat Spiral HD Reels, No Daily Grease Maintenance Bearings Flat Spiral HD Reels, No Daily Grease Maintenance Bearings Flat Spiral HD Reels, No Daily Grease Maintenance Bearings Flat Spiral HD Reels, No Daily Grease Maintenance Bearings Flat Spiral HD Reels, No Daily Grease Maintenance Bearings Flat Spiral HD Reels, No Daily Grease Maintenance Bearings Flat Spiral HD Reels, No Daily Grease Maintenance Bearings Flat Spiral HD Reels, No Daily Grease Maintenance Bearings
Extendable Tongue Rear Hitch: Max. 2,500 lb Tongue Weight and 10,000 lb Tow Weight with Hydraulic WITH ATTACHMENT Extendable Tongue Rear Hitch: Max. 2,500 lb Tongue Weight and 10,000 lb Tow Weight with Hydraulic WITH ATTACHMENT Extendable Tongue Rear Hitch: Max. 2,500 lb Tongue Weight and 10,000 lb Tow Weight with Hydraulic WITH ATTACHMENT Extendable Tongue Rear Hitch: Max. 2,500 lb Tongue Weight and 10,000 lb Tow Weight with Hydraulic WITH ATTACHMENT Extendable Tongue Rear Hitch: Max. 3,750 lb Tongue Weight and 15,000 lb Tow Weight with Hydraulic Remotes and Lighting Receptacle WITH ATTACHMENT Extendable Tongue Rear Hitch: Max. 3,750 lb Tongue Weight and 15,000 lb Tow Weight with Hydraulic Remotes and Lighting Receptacle WITH ATTACHMENT Extendable Tongue Rear Hitch: Max. 3,750 lb Tongue Weight and 15,000 lb Tow Weight with Hydraulic Remotes and Lighting Receptacle WITH ATTACHMENT Extendable Tongue Rear Hitch: Max. 3,750 lb Tongue Weight and 15,000 lb Tow Weight with Hydraulic Remotes and Lighting Receptacle WITH ATTACHMENT
Extendable Tongue Rear Hitch: Max. 2,500 lb Tongue Weight and 10,000 lb Tow Weight with Hydraulic WITHOUT ATTACHMENT Extendable Tongue Rear Hitch: Max. 2,500 lb Tongue Weight and 10,000 lb Tow Weight with Hydraulic WITHOUT ATTACHMENT Extendable Tongue Rear Hitch: Max. 2,500 lb Tongue Weight and 10,000 lb Tow Weight with Hydraulic WITHOUT ATTACHMENT Extendable Tongue Rear Hitch: Max. 2,500 lb Tongue Weight and 10,000 lb Tow Weight with Hydraulic WITHOUT ATTACHMENT Extendable Tongue Rear Hitch: Max. 2,500 lb Tongue Weight and 10,000 lb Tow Weight with Hydraulic WITHOUT ATTACHMENT Extendable Tongue Rear Hitch: Max. 2,500 lb Tongue Weight and 10,000 lb Tow Weight with Hydraulic WITHOUT ATTACHMENT Extendable Tongue Rear Hitch: Max. 2,500 lb Tongue Weight and 10,000 lb Tow Weight with Hydraulic WITHOUT ATTACHMENT Extendable Tongue Rear Hitch: Max. 2,500 lb Tongue Weight and 10,000 lb Tow Weight with Hydraulic WITHOUT ATTACHMENT

Standard equipment

 
Hitch
Hydraulics
Transport locks and safety
8005-11 8005-14 8005-20 8005-25 8005-30 8005-34 8005-40 8005-50
Combination CAT III - 1-1/2" Pin and C clevis - 1 1/4"  Pin Combination CAT III - 1-1/2" Pin and C clevis - 1 1/4"  Pin Articulating Ball, CAT IV- 2" Pin Articulating Ball, CAT IV- 2" Pin Articulating Ball, CAT IV- 2" Pin Articulating Ball, CAT IV- 2" Pin Articulating Ball, CAT IV- 2" Pin Articulating Ball, CAT V - 2 3/4" Pin
Single Point Depth Control, Color Coded Hydraulic Hose Grips, All Hydraulic Hoses Single Point Depth Control, Color Coded Hydraulic Hose Grips, All Hydraulic Hoses Single Point Depth Control, Color Coded Hydraulic Hose Grips, All Hydraulic Hoses Single Point Depth Control, Color Coded Hydraulic Hose Grips, All Hydraulic Hoses Single Point Depth Control, Color Coded Hydraulic Hose Grips, All Hydraulic Hoses Single Point Depth Control, Color Coded Hydraulic Hose Grips, All Hydraulic Hoses Single Point Depth Control, Color Coded Hydraulic Hose Grips, All Hydraulic Hoses Single Point Depth Control, Color Coded Hydraulic Hose Grips, All Hydraulic Hoses
Hydraulic Lock Valves (Lift and Wing Fold), Slow Moving Sign, High Visibility LED Lighting Hydraulic Lock Valves (Lift and Wing Fold), Slow Moving Sign, High Visibility LED Lighting Hydraulic Lock Valves (Lift and Wing Fold), Slow Moving Sign, High Visibility LED Lighting Hydraulic Lock Valves (Lift and Wing Fold), Slow Moving Sign, High Visibility LED Lighting Hydraulic Lock Valves (Lift and Wing Fold), Slow Moving Sign, High Visibility LED Lighting Hydraulic Lock Valves (Lift and Wing Fold), Slow Moving Sign, High Visibility LED Lighting Hydraulic Lock Valves (Lift and Wing Fold), Slow Moving Sign, High Visibility LED Lighting Hydraulic Lock Valves (Lift and Wing Fold), Slow Moving Sign, High Visibility LED Lighting

Excalibur Gangs

 
Gangs
Gang angle
Excalibur blades
8005-11 8005-14 8005-20 8005-25 8005-30 8005-34 8005-40 8005-50
1-3/4" Round Diameter Alloy Tie Rod, Rock-Flex® Bearing Arms - C-Type 1-1/4" x 2-1/2", 6" Bell Diameter Ductile Iron Spools, Cast Housing PEER® TILLXTREME™ No Daily Grease Maintenance Bearings, Trash Bars, Tie Rod Wrench 1-3/4" Round Diameter Alloy Tie Rod, Rock-Flex® Bearing Arms - C-Type 1-1/4" x 2-1/2", 6" Bell Diameter Ductile Iron Spools, Cast Housing PEER® TILLXTREME™ No Daily Grease Maintenance Bearings, Trash Bars, Tie Rod Wrench 1-3/4" Round Diameter Alloy Tie Rod, Rock-Flex® Bearing Arms - C-Type 1-1/4" x 2-1/2", 6" Bell Diameter Ductile Iron Spools, Cast Housing PEER® TILLXTREME™ No Daily Grease Maintenance Bearings, Trash Bars, Tie Rod Wrench 1-3/4" Round Diameter Alloy Tie Rod, Rock-Flex® Bearing Arms - C-Type 1-1/4" x 2-1/2", 6" Bell Diameter Ductile Iron Spools, Cast Housing PEER® TILLXTREME™ No Daily Grease Maintenance Bearings, Trash Bars, Tie Rod Wrench 1-3/4" Round Diameter Alloy Tie Rod, Rock-Flex® Bearing Arms - C-Type 1-1/4" x 2-1/2", 6" Bell Diameter Ductile Iron Spools, Cast Housing PEER® TILLXTREME™ No Daily Grease Maintenance Bearings, Trash Bars, Tie Rod Wrench 1-3/4" Round Diameter Alloy Tie Rod, Rock-Flex® Bearing Arms - C-Type 1-1/4" x 2-1/2", 6" Bell Diameter Ductile Iron Spools, Cast Housing PEER® TILLXTREME™ No Daily Grease Maintenance Bearings, Trash Bars, Tie Rod Wrench 1-3/4" Round Diameter Alloy Tie Rod, Rock-Flex® Bearing Arms - C-Type 1-1/4" x 2-1/2", 6" Bell Diameter Ductile Iron Spools, Cast Housing PEER® TILLXTREME™ No Daily Grease Maintenance Bearings, Trash Bars, Tie Rod Wrench 1-3/4" Round Diameter Alloy Tie Rod, Rock-Flex® Bearing Arms - C-Type 1-1/4" x 2-1/2", 6" Bell Diameter Ductile Iron Spools, Cast Housing PEER® TILLXTREME™ No Daily Grease Maintenance Bearings, Trash Bars, Tie Rod Wrench
Mechanical Adjustment 1 to 5 Degrees Mechanical Adjustment 1 to 5 Degrees Mechanical Adjustment 1 to 5 Degrees Mechanical Adjustment 1 to 5 Degrees Mechanical Adjustment 1 to 5 Degrees Mechanical Adjustment 1 to 5 Degrees Hydraulic Adjustment 1 to 5 Degrees Hydraulic Adjustment 1 to 5 Degrees
Excalibur® VT Blades - 22" Diameter, 5mm, 32 Flute, Reversed Crimped Center Excalibur® VT Blades - 22" Diameter, 5mm, 32 Flute, Reversed Crimped Center Excalibur® VT Blades - 22" Diameter, 5mm, 32 Flute, Reversed Crimped Center Excalibur® VT Blades - 22" Diameter, 5mm, 32 Flute, Reversed Crimped Center Excalibur® VT Blades - 22" Diameter, 5mm, 32 Flute, Reversed Crimped Center Excalibur® VT Blades - 22" Diameter, 5mm, 32 Flute, Reversed Crimped Center Excalibur® VT Blades - 22" Diameter, 5mm, 32 Flute, Reversed Crimped Center Excalibur® VT Blades - 22" Diameter, 5mm, 32 Flute, Reversed Crimped Center

 
KKS-PlaceHolder2
KKS-PlaceHolder3
KKS-PlaceHolder1
8005-11 8005-14 8005-20 8005-25 8005-30 8005-34 8005-40 8005-50
None None None None None None None None
None None None None None None None None
Hydraulic Adjustment 1 to 5 Degrees Hydraulic Adjustment 1 to 5 Degrees Hydraulic Adjustment 1 to 5 Degrees Hydraulic Adjustment 1 to 5 Degrees Hydraulic Adjustment 1 to 5 Degrees Hydraulic Adjustment 1 to 5 Degrees Not Applicable Not Applicable

Tires/Wheels

 
Main frame
Wing frame
8005-11 8005-14 8005-20 8005-25 8005-30 8005-34 8005-40 8005-50
Walking Beams With Spherical Pivot Bearings, Slip-In Spindles,  6  Bolt Heavy-Duty Hubs, Four 12.5L x 15" 12 ply Walking Beams With Spherical Pivot Bearings, Slip-In Spindles,  6  Bolt Heavy-Duty Hubs, Four 12.5L x 15" 12 ply Walking Beams With Spherical Pivot Bearings, Slip-In Spindles,  8 Bolt Heavy-Duty Hubs, Four 340/60 R16.5 Walking Beams With Spherical Pivot Bearings, Slip-In Spindles, 8 Bolt Heavy-Duty Hubs, Four 340/60 R16.5 Walking Beams With Spherical Pivot Bearings, Slip-In Spindles, 8 Bolt Heavy-Duty Hubs, Four 380/60 R16.5 Walking Beams With Spherical Pivot Bearings, Slip-In Spindles, 8 Bolt Heavy-Duty Hubs, Four 440 x 55 R18 Walking Beams With Spherical Pivot Bearings, Slip-In Spindles, 8 Bolt Heavy-Duty Hubs, Four 440 x 55 R18 Walking Beams With Spherical Pivot Bearings, Slip-In Spindles, 10 Bolt Heavy-Duty Hubs, Four 445/50 R22.5
Not Applicable Not Applicable Walking Beams With Spherical Pivot Bearings, Slip-in Spindles, 6 Bolt Heavy-Duty Hubs, Two 280/70 R15  Per Wing Walking Beams With Spherical Pivot Bearings, Slip-in Spindles, 6 Bolt Heavy-Duty Hubs, Two 280/70 R15 Per Wing Walking Beams With Spherical Pivot Bearings, Slip-in Spindles, 6 Bolt Heavy-Duty Hubs, Two 280/70R x 15 per Wing Walking Beams With Spherical Pivot Bearings, Slip-in Spindles,   8 Bolt Heavy-Duty Hubs, Two 340/60 R16.5 per Wing Walking Beams With Spherical Pivot Bearings, Slip-in Spindles, 8 Bolt Heavy-Duty Hubs, Two 280/70R x 15 per Wing Walking Beams With Spherical Pivot Bearings, Slip-In Spindles, 10 Bolt Heavy-Duty Hubs, Four 340/60 R16.5

Cylinders

 
Wing fold
Depth control
8005-11 8005-14 8005-20 8005-25 8005-30 8005-34 8005-40 8005-50
Not Applicable Not Applicable Two 4" x 40" Adjustable Constant-Flow Hydraulic Down Pressure" Two 4" x 40" Adjustable Constant-Flow Hydraulic Down Pressure" Two 5" x 40" Adjustable Constant-Flow Hydraulic Down Pressure" Four 4" x 40" Adjustable Constant-Flow Hydraulic Down Pressure" Two 5" x 40"   Four 4-1/2" x 16" Adjustable Constant-Flow Hydraulic Down Pressure" Two 5" x 40"   Four 4-1/2" x 16" Adjustable Constant-Flow Hydraulic Down Pressure"
(2) 4" x 10" (2) 4" x 10" Center: (2) 4" x 10"
Wings: (2) 3-3/4" x 10"
Center: (2) 4" x 10"
Wings: (2) 3-3/4" x 10"
Center: (2) 4 -1/4" x 10"         Wings: (2) 4" x 10" Center: (2) 4 1/4" x 10"
Wings: (2)  4" x 10"
Center: (2) 4-1/4" x 10"
Inner Wing: (2) 4" x 10"
Outer Wing: (2) 3-3/4" x 10"
Center: (2) 4-1/2" x 10"                 Inner Wing: (2) 4-1/4" x 10"         Outer Wing: (2) 4" x 10"

Star Wheel Treaders

 
Gang
8005-11 8005-14 8005-20 8005-25 8005-30 8005-34 8005-40 8005-50
1-1/2" Round Diameter Alloy Tie Rod, Rigid Bearing Arms, 8" Spacing, 6 Degree Angle, Constant-Flow Hydraulic Adjustable Gangs, Flangette PEER® TILLXTREME™ No Daily Grease Maintenance Bearings 1-1/2" Round Diameter Alloy Tie Rod, Rigid Bearing Arms, 8" Spacing, 6 Degree Angle, Constant-Flow Hydraulic Adjustable Gangs, Flangette PEER® TILLXTREME™ No Daily Grease Maintenance Bearings 1-1/2" Round Diameter Alloy Tie Rod, Rigid Bearing Arms, 8" Spacing, 6 Degree Angle, Constant-Flow Hydraulic Adjustable Gangs, Flangette PEER® TILLXTREME™ No Daily Grease Maintenance Bearings 1-1/2" Round Diameter Alloy Tie Rod, Rigid Bearing Arms, 8" Spacing, 6 Degree Angle, Constant-Flow Hydraulic Adjustable Gangs, Flangette PEER® TILLXTREME™ No Daily Grease Maintenance Bearings 1-1/2" Round Diameter Alloy Tie Rod, Rigid Bearing Arms, 8" Spacing, 6 Degree Angle, Constant-Flow Hydraulic Adjustable Gangs, Flangette PEER® TILLXTREME™ No Daily Grease Maintenance Bearings 1-1/2" Round Diameter Alloy Tie Rod, Rigid Bearing Arms, 8" Spacing, 6 Degree Angle, Constant-Flow Hydraulic Adjustable Gangs, Flangette PEER® TILLXTREME™ No Daily Grease Maintenance Bearings 1-1/2" Round Diameter Alloy Tie Rod, Rigid Bearing Arms, 8" Spacing, 6 Degree Angle, Constant-Flow Hydraulic Adjustable Gangs, Flangette PEER® TILLXTREME™ No Daily Grease Maintenance Bearings 1-1/2" Round Diameter Alloy Tie Rod, Rigid Bearing Arms, 8" Spacing, 6 Degree Angle, Constant-Flow Hydraulic Adjustable Gangs, Flangette PEER® TILLXTREME™ No Daily Grease Maintenance Bearings

OPERATING INFORMATION

 
Recommended operating speed
Recommended working depth
Recommended tractor power range
8005-11 8005-14 8005-20 8005-25 8005-30 8005-34 8005-40 8005-50
8-10 mph / 12-16 km/h
(Rocky Conditions: 6-8 mph / 9-13 km/h)
8-10 mph / 12-16 km/h
(Rocky Conditions: 6-8 mph / 9-13 km/h)
8-10 mph / 12-16 km/h
(Rocky Conditions: 6-8 mph / 9-13 km/h)
8-10 mph / 12-16 km/h
(Rocky Conditions: 6-8 mph / 9-13 km/h)
8-10 mph / 12-16 km/h
(Rocky Conditions: 6-8 mph / 9-13 km/h)
8-10 mph / 12-16 km/h
(Rocky Conditions: 6-8 mph / 9-13 km/h)
8-10 mph / 12-16 km/h
(Rocky Conditions: 6-8 mph / 9-13 km/h)
8-10 mph / 12-16 km/h
(Rocky Conditions: 6-8 mph / 9-13 km/h)
3.5" / 8.9 cm 3.5" / 8.9 cm 3.5" / 8.9 cm 3.5" / 8.9 cm 3.5" / 8.9 cm 3.5" / 8.9 cm 3.5" / 8.9 cm 3.5" / 8.9 cm
8-10 PTO Horsepower per Foot 8-10 PTO Horsepower per Foot 8-10 PTO Horsepower per Foot 8-10 PTO Horsepower per Foot 8-10 PTO Horsepower per Foot 8-10 PTO Horsepower per Foot 8-10 PTO Horsepower per Foot 8-10 PTO Horsepower per Foot

Media