Flail mowers TRP

Silhouette of the TRP

A range to deal with any situation

TRP over-ground shredders are designed to shred your vine shoots and other prunings efficiently and quickly, even in difficult or stony conditions.

Find a distributor near you

The shredding of prunings has many agronomic advantages, thus becoming essential in the management of vines and orchards. Indeed, prunings provide an ideal environment for the development of parasites and diseases. Fine shredding preserves the health of plantations by increasing the contact area between matter and microorganisms: pests have neither the time nor the space to grow. With the RT and CV versions of the TRP, it is also possible to harvest the shredded material of the prunings. This helps reduce the risk of wood diseases, but can also be a source of green energy. Produced on the farm and usable as heating fuel, shredded material provides an economical energy resource. A real alternative to fuel or electricity, the use of this resource contributes to the reduction of CO2 emissions.
The TRP 120 shredder at work

Your benefits

Robust shredders for every situation

The TRP 120 shredder is robust in any situation

Choose robustness and resistance with the TRP range

The thick sections give the shredder a rigid structure. The lower part of the shredder is consolidated to withstand the impacts of foreign objects and a sheet metal lining is welded to the shredding casing. The opening rear hood enables you to change the shredding tools easily. Therefore, you can make quick progress to maintain a high output. The oversized drive chain can withstand heavy stress, particularly under difficult conditions. There are two pick-up drive versions available: The mechanical drive comes with a torque limiter that protects all components (friction limiter on TRP 120/145/175). The hydraulic drive is fitted with an oil flow adjustment valve. The free wheel in the gearbox ensures a longer life of the belts and full protection of the drive components. The constant lubrication of the system greatly reduces maintenance costs.

The 175 PRO REV: you will appreciate its shredding of large branches

With the TRP 175 PRO REV shredder, you can quickly overcome the largest volumes of residues and thick branches. It is perfectly suited to olive or citrus groves. It can be installed at the frontal or rear as well as on reverse drive-station tractors, and has a single rotor (457 mm in diameter) equipped with heavy hammer knives mounted on reinforced holders. The toothed heavy hammer knife holders that are welded on the rotor tube in a helical arrangement. These holders allow uniform grab of the woody
remains and keep them inside the chopping chamber until complete and fine shredding is achieved. In addition - when shredding large rows or large-size prunings - the toothed holders act themselves as fixed blades. Finally, with three counter blades further improving the shredding quality, you obtain a fine shredding result in a single pass.
The TRP 175 PRO REV shredder enables you to handle large diameter branches

Collect the shredded material with the TRP CV and TRP RT shredders

Following shredding, harvesting of branches can be a green and economical energy resource on the farm if they are used as heating fuel. A rotor with eight-rows of heavy hammer knives driven at high speed and a shredding casing with four aggressive counter blades ensure exceptional shredding for both ranges. Regarding harvesting, TRP CV shredders are equipped with a chute that can be steered according to your trailer positioning possibilities. The chute cap is adjusted hydraulically to control the flow of material. TRP RT shredders come with a nylon bag harvesting system with a capacity of 800 litres. You store the shredded material directly in a perforated bag that will limit fermentation (patented material). You can then drop the filled bags on the ground or load them directly onto a trailer.
Collect the shredded material with the TRP 145 CV shredder and its chute

Choose a machine adapted to stony plots

The TRP 120 pick-up fitted with collecting tines to adapt to stony conditions

Cope with stony situations with the TRP range!

Your shredder adapts to differing situations. In flat grassy fields, the height is adjusted by a roller: the machine remains stable when passing over ruts. In stony ground, fixed or semi-pivoting wheels absorb the shocks of uneven terrain. In very stony grounds, the pick-up can be fitted with collecting tines (optional equipment). It is held off the ground to avoid collecting stones. For a more precise use, the tines are adjustable in height.

Controlled height with the TRP PRO REV, TRP CV and TRP RT ranges

On the TRP PRO REV, TRP CV and TRP RT ranges, you can choose between two height control devices: fixed side wheels or a roller of diameter 180 mm with removable ends.
Height control by wheels on the TRP CV shredders

Choose a reliable shredder in the TRP range

The grid ensures fine and even shredding of TRP shredders

Continued fine shredding of prunings

No shoots are left on the ground. The pick-up rakes the residues effectively into the reinforced casing. The eight-row rotor, equipped with forged hammer knives in helical layout, improves residue suction and ensures a fine and uniform shredding of branches and wood up to 10 cm in diameter. The shredded material passes through the casing only when it has reached an adequate size: it is evacuated through the grid calibrated with holes 35 mm in diameter. The homogeneous distribution of shredded residues over the entire work width contributes to their good decomposition. Two types of gearboxes are available as standard: a gearbox with two output shafts (1 for the rotor, 1 for the pick-up) on the mechanical version; a gearbox with one output shaft on the hydraulic version.
The TRP 145 CV shredder collects the material to shred even in stony conditions

Specifications

Technical characteristics

 
Working width (m)
Overall width (m)
Outer rotor diameter (mm)
Tool linear speed (540 rpm/1000 rpm in m/s)
Overall width (m) with wheels/roller
Tool linear speed (m/s) - at 540 min-1
Tool linear speed (m/s) - at 1000 min-1
Number of heavy hammer knives
Number of counter-knives
Reinforcing plate
Working height adjustment
Roller diameter (mm)
Wheel size
Lifting height with machine on ground (m) - for RT version
Volume of bag (gal.) - for RT version
Chute position - for CV version
Chute deflector - for CV version
Pick-up drive
Pick-up safety
PTO speed (min-1)
Free wheel integrated in the central gearbox
Number of belts
Belt type
Rotor speed (min-1)
Rotor speed (min-1) at 540 min-1
Rotor speed (min-1) at 1000 min-1
Minimum power allowable at gearbox (kW)
Minimum power allowable at gearbox (hp)
Maximum power allowable at gearbox (kW)
Maximum power allowable at gearbox (hp)
Hitch
Lengthened coupling yokes
Required tractor hydraulic connections
Weight with equipment (kg)
TRP 95 TRP 120 TRP 120 RT TRP 145 TRP 145 RT / CV TRP 175 TRP 175 RT / CV TRP 175 PRO REV
0.95 1.20 1.20 1.45 1.45 1.73 1.73 1.73
1.21 1.46 1.72 2.00 2.00
467 467 465 467 465 467 465 457
53.4 53.4 53.4 53.4
1.65/1.45 1.90/1.71 2.18/1.99
64 64 64
76 76 76
12 16 16 20 20 24 24 24
3 straight - Bolted 3 straight - Bolted 4 straight - 1 welded, 3 bolted 3 straight - Bolted 4 straight - 1 welded, 3 bolted 3 straight - Bolted 4 straight - 1 welded, 3 bolted
As standard 4 mm, welded As standard 4 mm, welded As standard 4 mm, welded As standard 4 mm, welded As standard 4 mm, welded As standard 4 mm, welded As standard 4 mm, welded
By fixed or semi-pivoting wheels, roller with removable ends By fixed or semi-pivoting wheels, roller with removable ends By fixed or semi-pivoting wheels, roller with removable ends By fixed or semi-pivoting wheels, roller with removable ends By fixed or semi-pivoting wheels, roller with removable ends By fixed or semi-pivoting wheels, roller with removable ends By fixed or semi-pivoting wheels, roller with removable ends By fixed wheels or roller
180 180 180 180 180 180 180
16x6.50-8 6 PR 16x6.50-8 6 PR 18x7-8 14PR 16x6.50-8 6 PR 18x7-8 14PR 16x6.50-8 6 PR 18x7-8 14PR
1.10 1.10 1.10
750 750 750
Side or rear discharge Side or rear discharge
Hydraulic Hydraulic
Mechanical or hydraulic Mechanical or hydraulic Hydraulic Mechanical or hydraulic Hydraulic Mechanical or hydraulic Hydraulic
Friction slip clutch as standard on the mechanical version Friction slip clutch as standard on the mechanical version Friction slip clutch as standard on the mechanical version By hydraulic pressure relief valve Friction slip clutch as standard on the mechanical version By hydraulic pressure relief valve
540 540 540 or 1000 540 540 or 1000 540 540 or 1000
As standard As standard As standard As standard As standard As standard As standard Integrated in the central gearbox
3 3 3 4 4 5 5 2 + 2
SPBX SPBX SPBX SPBX SPBX SPBX SPBX Powerband
2188 2188 2188 2188 3055
2600 2600 2600
3250 3250 3250
44 51 51 59 59 66 66 66
60 70 70 80 80 90 90 90
88 88 96 88 96 88 96 110
120 120 130 120 130 120 130 150
3-point - Cat. 1 and 2 3-point - Cat. 1 and 2 3-point - Cat. 1 and 2 3-point - Cat. 1 and 2 3-point - Cat. 1 and 2 3-point - Cat. 2 3-point - Cat. 2
- As standard As standard As standard As standard
2 DA 2 DA 2 DA
625 790 1070 950 1200 / 1000 1075 1300 / 1100 1250

Media