Flail mowers RM

Silhouette of the RM

Shredders championing in intensive conditions!

Rigid RM shredders are available with working widths of 2.36 to 4.01 m and adaptable on tractors up to 200 hp. The folding RM R models feature working widths of 4.80 and 6.10 m and can be used on tractors up to 350 hp.

Find a distributor near you

Rigid or foldable RM SERIES shredders are suitable for shredding crop residues such as grain stubble, maize and sunflower stalks, but also for the maintenance of pastures and grasslands. They are mainly used by grain farms, machinery cooperatives or contractors. For the design of the rotor, we kept in mind three important criteria: a large diameter, a significant overlap between the tools and a high linear speed of the tools. The helical tool layout improves suction of plant biomass for better cutting and homogeneous distribution of residues on the ground.
RM at work

Your benefits

Three criteria: an impeccable shredding quality

Three beams of large section on the RM 320 shredder allow withstanding the most difficult conditions

Three large section beams to withstand the most difficult conditions

RM shredders have proven their effectiveness in the field for years, as have their exceptionally robust casings. Their secret: a design consisting of three beams of large section to withstand the most difficult conditions. For improved stone protection, all RM SERIES shredder models are equipped with a 4mm bolted sheet metal lining.

Adapt the tool as closely as possible to your needs

You can choose between two types of tools according to your needs. For fine shredding of all types of residues use Y knives with stubble pallets that will lacerate the residue to accelerate their decomposition. They also improve suction of residues lodged in the hood. In order to achieve a clean cut for the most woody plants use long hammer knives suitable for shredding grass, maize or sunflower stalks.
Y knives on a RM 610 shredder for all types of residues

Keep control over the shredding height

The shredding height of plant biomass is adjustable either by pivoting wheels adjustable in height and laterally for shredding crop residues, or by a roller for fallow and grassland management.
For better ground following, the top link rod is in the "floating" position.
The pivoting wheels for shredding height control with shredders of the RM SERIES

Increase comfort in difficult conditions

Double drive on RM 320 and RM 400 shredders, adapted to high power

Benefit from a drive adapted to high power

Thanks to the double drive on the RM 320 and RM 400 models with working widths of 3.23 and 4.01 m respectively, power transmission is better distributed to the drive components. They require a 90 to 130 hp traction.

Easy change of tools

The rear hood can be lifted manually for easier access to the rotor. This make it easier to change tools.
The rear hood of the RM 320 shredder opens manually in order to better access the rotor for easy change of tools.

A hydraulic transport system for increased comfort on roads

A hydraulic lengthways transport system is available for the RM 400 shredder. In any case, the machine does not exceed the width of the tractor and can be transported in complete safety and with peace of mind.
Hydraulic lengthways transport system for the RM 400 shredder: comfort and safety

A foldable version for higher productivity

The central chassis is made with large section beams on the RM R folding shredders for greater resistance to mechanical stress

Benefit from a high resistance to stress

The central chassis is made with large section beams ensuring stiffness and resistance to mechanical stresses. In addition, each half-shredder is connected to the central chassis by a bushed pivot point with a pin stopped from rotating to prevent the attachment from wear.

Be relaxed on roads

The two shredding units unfold/fold hydraulically and lock in place for total safety during transport. Lighting and signalling belong to the standard equipment.
The RM 610 shredder for transport in total safety with hydraulic folding system

Efficient management of the central strip

To minimise the central strip, we optimized the suction in the centre of the machine. Residues flow to one of the shredding units fitted with more tools in the central area. A divider share has also been installed. As optional equipment, it is possible to mount a hydraulically controlled disc, in front, between the two units, in order to completely remove the strip of residues in the intermediate areas.
Divider share on the RM 610 shredder for optimum suction of the plant biomass

RM 610 shredder at work in corn residues

Specifications

Technical characteristics

 
Working width (m)
Overall width (m)
Outer rotor diameter (mm)
Tool linear speed (540 rpm/1000 rpm in m/s)
Number of long hammer knives
Number of Y knives with stubble pallets
Number of counter-knives
Reinforcing plate
Skid kit
Working height adjustment
Roller diameter (mm)
Tyres
PTO speed (min-1)
Free wheel integrated in the central gearbox
Number of belts
Belt type
Rotor speed (min-1)
Minimum power allowable at gearbox (kW)
Minimum power allowable at gearbox (hp)
Maximum power allowable at gearbox (kW)
Maximum power allowable at gearbox (hp)
Hitch
Setting into transport position
Weight with equipment (kg)
RM 240 RM 280 RM 320 RM 400 RM 480 R RM 610 R
2.36 2.80 3.23 4.00 4.80 6.07
2.55 (2.61 with wide skids) 3.00 (3.06 with wide skids) 3.48 (3.54 with wide skids) 4.35 2.50 2.50
647 647 647 703 620 630
62 57 60 64 55.6 55.6
28 32 36 44 56 68
56 + 28 64 + 32 72 + 36 88 + 44 112 + 56 136 + 68
1 straight - bolted 1 straight - bolted 1 straight - bolted 1 straight - bolted 1 straight - bolted 1 straight - bolted
As standard 4 mm, bolted As standard 4 mm, bolted As standard 4 mm, bolted As standard 4 mm, bolted As standard 4 mm, bolted As standard 4 mm, bolted
As standard - fixed As standard - fixed As standard - fixed As standard - fixed As standard - wide, fixed As standard - wide, fixed
By 2 semi-pivoting wheels or roller with removable ends By 2 semi-pivoting wheels or roller with removable ends By 2 semi-pivoting wheels or roller with removable ends By 4 semi-pivoting wheels By semi-pivoting wheels or rollers with removable ends By semi-pivoting wheels or rollers with removable ends
220 220 220 - 220 220
195/65-R15 195/65-R15 195/75-R14 195/75-R14 10.0/80 - 12 10PR 10.0/80 - 12 10PR
540 / 1000 1000 1000 1000 1000 1000
As standard As standard As standard As standard As standard As standard
4 4 3 + 3 4 + 4 4+4 5+5
SPBX SPBX SPBX SPBX SPBX SPBX
1833 / 1960 1680 1758 1400 1714 1714
65 74 88 96 118 132
90 100 120 130 160 180
110 125 147 206 257 257
150 170 200 280 350 350
3-point - Cat. 2 - fixed 3-point - Cat. 2 - fixed
(semi-automatic as optional equipment)
3-point - Cat. 2 - fixed
(semi-automatic as optional equipment)
3-point - Cat. 2 - semi-automatic 3-point - Cat. 2 and 3 3-point - Cat. 2 and 3
- - - As optional equipment
1195 1210 1400 2130 2600 3200

Media