MDS .2 mounted centrifugal fertiliser spreaders

MDS .2 silhouette

A simple and effective machine for daily use

MDS .2 and MDS.2 W mounted fertiliser spreaders provide working widths of 10 to 24m (depending on the discs and products used). Their single-cone hopper has a capacity of 500 to 2,000l.

Find a distributor near you

Fertilising specialised crops (vines, orchards, hops, vegetables) and grain crops requires mastery and extreme precision.
MDS .2 mounted fertiliser spreaders provide a simple solution that is adapted to all of your operations. You have a multitude of possibilities in terms of size, capacity, outlet opening and closing and even regulation. The single-cone hopper can be emptied completely, even when spreading on slopes. MDS W fertiliser spreaders are equipped with a weighing frame and feature application rate regulation so no need to do a calibration test.
MDS at work in the field

Your benefits

Just as effective between rows as in the field

Easy passage between rows of vines with the MDS 8.2 and its "broken" hopper angles

Designed to spread between rows

MDS 8.2 and MDS 14.2 fertiliser spreaders have overall widths of 1.08m and 1.40m respectively. This compact design makes them particularly suited to orchards and vineyards. The "broken" angles of the hopper on the MDS 8.2 model contribute to easy manoeuvring from row to row without damaging crops and plantations.

Precision spreading in two rows

A spreading limiter on 2 rows directs the fertiliser to the base of the plantation for row crops, with 1.50 to 5m spacing. This optional, removable part is quick and easy to adjust, no tools required. It is made of stainless steel to guarantee a long service life. The spreading limiter supplies the ideal and optimised mineral input to your plantations and crops by delivering the fertiliser next to the roots.
Spreading limiters in two rows to spread directly at the base of plantations with MDS 8.2 mounted fertiliser spreaders.

Higher capacity for more autonomy

MDS 18.2 and 20.2 mounted fertiliser spreaders have a wide choice of extensions to adapt to different types of tractor. The 2,000l maximum hopper capacity of the new MDS 20.2 mounted fertiliser spreader can hold 3 big bags of ammonium nitrate 33.5% for example, making it the ideal machine for farms looking for simplicity and efficiency. This higher capacity hopper can adapt to lighter fertilisers and big-bag-packaged products. Downtime necessary for reloading is therefore reduced.
A 2,000l hopper for the new MDS 20.2 fertiliser spreader for easy loading by big bag

Robust and durable

A reinforced oil-bath gearbox drives the spreading discs. The first gearbox oil change is only necessary after 10 years. The solid heart of the machine boasts unrivalled longevity and the capacity to withstand difficult working conditions. The bottom of the tank, the agitator shaft and the outlets are made of stainless steel for extreme durability.
MDS .2 fertiliser spreader's gearbox reinforced by oil bath to increase durability

Precise application rate and optimum distribution

The MDS range optional two-row spreading system

MDS spreading discs: (Multi-Disc-System), so much precision!

MDS (Multi-Disc-System) spreading discs are designed for standard or late spreading in high crops. They are simple to use and guarantee high precision with granular and organic (pellets) fertilisers, cover crop seeds and anti-slug pellets. According to the type of fertiliser and the working width, the length and orientation of the vanes can be adjusted. They are quick to adjust using the spreading chart. The discs are quick to remove, no tools required, for easy emptying. M1 discs come as standard for working widths between 10 and 18m. M2 discs enable working widths of 18 to 24 m depending on the product being spread, without impairing spreading quality, and improving yield on field borders.

D.F.C scale: Perfect settings!

Two graduated scales are ideally positioned at the front of the hopper for perfect visibility of settings from the tractor cab. There is no need to squeeze in between the wheel and the machine to access the scale! To change application rates from one plot to another, there is nothing simpler, just position the opening stop on the D.F.C. (Direct Flow Control) scale. The D.F.C. scale is proportional to fertiliser flow, therefore, it is quick and easy to modify flow rate with no extra equipment required. By increasing the opening by 10 % you increase the application rate by 10%. Settings are precise, fast, and reliable, from 3 kg/ha for fertilisers, seeds and slug-pellets. Half-width shut-off comes as standard too.
D.F.C scale for simple and precise application-rate control on the whole range of MDS .2 machines

Smooth flowing fertiliser for seamless precision

MDS .2 fertiliser spreaders have a slowly rotating agitator: only 180 rpm! This creates a regular fertiliser flow without damaging the granules and without clogging the outlets. The agitator guarantees optimum spreading precision whatever size or density the product to spread is.
Slowly rotating agitator for smooth fertiliser flow on the entire range of MDS .2 fertiliser spreaders

MDS W fertiliser spreaders: simple and efficient weighing!

The four MDS 8.2 W, MDS 14.2 W, MDS 18.2 W and MDS 20.2 W models are equipped with a weighing frame. They feature all the assets of the MDS .2 range with the additional benefit of being able to regulate the application rate automatically, without needing to do a calibration test.
Two weighing cells measure the level remaining in the hopper at a frequency of 100 Hz. The fertiliser rate is adjusted every 2 seconds thanks to the continuous regulation system. Consequently, the desired rate of fertiliser is spread immediately within the first few metres. For low application rates or small widths, such as in vineyards and orchards, static weighing allows the user to readjust the opening of the metering outlet as required.
MDS 8.2 W with integrated weighing system for application rate regulation

Control outlet opening and closing

MDS .2 Q version fertiliser spreader with two electric cylinders for outlet control

More precision with electronic outlet control (DPAE)

DPAE (electronic ground speed related application rate control) regulation is available on MDS .2 version Q and MDS W models, with opening and closing by two electric cylinders, one on each side. The QUANTRON A control box is particularly user-friendly. It allows you to open and close the outlets with just one START/STOP button and no need for a hydraulic valve. MDS .2 Q version and MDS W fertiliser spreaders are compatible with GPS terminals to give you the benefit of automatic outlet control at headlands and in field points. To optimise your inputs, the QUANTRON A control box is compatible with application rate modulation by GPS.

Direct outlet control with the E-Click control box

With MDS .2 C version models, control outlet opening and closing directly with two electric cylinders, one each side. Take advantage of the E-Click control box in the tractor cab with its two switches rather than using your hydraulic valves!
MDS .2 C fertiliser spreader with outlet control by two electric cylinders

Manual or hydraulic control?

You can opt for a K version machine which signifies that it has hydraulic opening by two single-acting cylinders. Each cylinder has a valve that can isolate the circuit in the event of an internal leak and this prevents the outlets from opening on their own. The D version takes safety even further with its two double-acting cylinders that prevent the outlets from opening if there is an internal leak.
MDS .2 version K fertiliser spreader with outlet control by two single-acting hydraulic valves

Equipment

Take advantage of effective options that adapt your machine to your conditions

a farmer working on MyKUHN on his computer

Manage your MDS.2 in MyKUHN

Unlock your success with MyKUHN
MDS 14.2 fertiliser spreader on the road

Specifications

Technical characteristics

 
Working width (m)
Basic / Maximum capacity (l)
Maximum payload (kg)
Filling height (cm)
Hopper width (m)
Loading width (m)
High flow rate (kg/min or kg/s)
Flow adjustment
Agitator
Border spreading
Half width shut-off
Hopper sieve
Fast-fit discs
Hitch
Gearbox (min-1)
Approx. weight (kg)
MDS 8.2 MDS 14.2 MDS 18.2 MDS 20.2
10 to 24 (depending on discs and product to spread) 10 to 24 (depending on discs and product to spread) 10 to 24 (depending on discs and product to spread) 10 to 24 (depending on discs and product to spread)
500 / 800 800 / 1400 700 / 1800 900 / 2000
800 (Cat. 1) / 800 (Cat. 2) 800 (Cat. 1) / 1400 (Cat. 2) 800 (Cat. 1) / 1800 (Cat. 2) 800 (Cat. 1) / 2000 (Cat. 2)
92 104 93 101
1.08 1.40 1.90 1.90
0.98 1.30 1.78 1.78
250 or 4.16 250 or 4.16 250 or 4.16 250 or 4.16
Manual with the DFC scale or electronic regulation (Quantron version) Manual with the DFC scale or electronic regulation (Quantron version) Manual with the DFC scale or electronic regulation (Quantron version) Manual with the DFC scale or electronic regulation (Quantron version)
For mineral granular fertiliser - Slow rotation: 180 min-1 For mineral granular fertiliser - Slow rotation: 180 min-1 For mineral granular fertiliser - Slow rotation: 180 min-1 For mineral granular fertiliser - Slow rotation: 180 min-1
By fast pallet adjustment as standard or by TELIMAT or GSE spread limiter as option By fast pallet adjustment as standard or by TELIMAT or GSE spread limiter as option By fast pallet adjustment as standard or by TELIMAT or GSE spread limiter as option By fast pallet adjustment as standard or by TELIMAT or GSE spread limiter as option
As standard As standard As standard As standard
As standard As standard As standard As standard
As standard As standard As standard As standard
Yokes with 2 height positions - Cat. 2 Yokes with 2 height positions - Cat. 2 Yokes with 2 height positions - Cat. 2 Yokes with 2 height positions - Cat. 2
Without maintenance - drive : 540 Without maintenance - drive : 540 Without maintenance - drive : 540 Without maintenance - drive : 540
200 220 250 250

Media