TB 10 offset arm verge flail mowers

TB 16 shredders silhouette

Lightweight. Robust. Multipurpose.

3 model available in 3 working widths (1.40 m, 1.60 m and 1.80 m) for maintenance of grassy areas, parks and gardens.

Find a distributor near you

The range of TB 10 series shredders includes three models with working widths of 1.40 m, 1.60 m and 1.80 m. These machines are intended for maintaining grass areas, parks and gardens. Light enough to be coupled to low power tractors (40 hp only), TB 10 series shredders benefit from a versatility allowing to carry out a wide variety of landscape maintenance work.
TB 10 shredder at work

Your benefits

Versatility to the smallest details

Different working positions: behind the tractor in vertical, offset or angled position

For shredding in any situation

TB 10 series are capable of working:
  • Behind the tractor.
  • In offset position.
  • With angles of – 45° to + 90° for work in ditches or on slopes.
TB 10 models also have additional offset of 66 cm to ensure perfect results anywhere, including between obstacles such as trees and electricity pylons.

Exceptional kinematics

Offset and angling values speak for themselves. Access difficult areas thanks to the exceptional kinematics of the TB 10 series.
Offset and angle values made possible with the kinematics

Choose the right tool

The patented hammer knives are designed for shredding grassy areas.
In case of shock between tools and rotor, their specific shape allows avoiding damage to the rotor and preventing any imbalance.
TB 10 series rotor

Small but robust

The TB 16 shredder is small but resists to shocks

Protected against shocks

The mechanical parts exposed to impacts (casing, belt guard, bearings…) are all protected.

Rotor: designed to last

The rotor is the main component of the machine. A single imbalance can affect wear of all other components.
To start on good bases, every rotor leaving the factory is carefully balanced thanks to meticulous procedures and high quality machining tools.
The rotors of TB shredders are designed to last

Robust components

A robust frame, a strong offset arm, pins and bushes that are protected against wear and a mechanical safety system on the linkage against impacts... all those features contribute to a long service life of the machine and less downtime. In compliance with current standards, there is also only one screw on the belt guards to loosen in order to access the belts.
Linkage of the TB 16

High-quality shredding

The hammer knives allow easy shredding of grass with the TB 10 series shredders

Fast decomposition of residues

Owing to the tools adapted to the rotor of diameter 425 mm and the welded counter-knife, the shredding result will be excellent meaning it can meet today's shredding issues in parks and gardens:
  • Control the spreading of weeds.
  • Deal with the ban on the use of plant protection products.

A roller closest to the rotor for improved residue decomposition

The TB 10 series shredder roller is as close as possible to the rotor. In this way, residues are ejected over the roller. Their decomposition is quicker because the passage of the roller does not compact them. The visual result is impeccable.
Key features:
  • Excellent ground following.
  • Self-cleaning by hammer knives.
A roller close to the rotor of TB shredders for easier residue decomposition

TB 16 shredder at work

Specifications

Technical characteristics

 
Working width (m)
Transport width (m)
Maximum ditch angle (H)
Maximum bank angle (l)
Number of hammer knives
Sensor roller diameter (mm)
Working height adjustment
PTO speed (min-1)
Free wheel integrated in the central gearbox
Number of SPBX belts
Belt type
Minimum theoretical power requirement at gearbox (kW)
Minimum theoretical power requirement at gearbox (hp)
Maximum power allowable at gearbox (kW)
Maximum power allowable at gearbox (hp)
Hitch
Weight with equipment (kg)
TB 14 TB 16 TB 18
1.40 1.60 1.80
1.60 1.80 2.00
-45° -45° -45°
+90° +90° +90°
20 24 28
160 160 160
By roller with fixed ends By roller with fixed ends By roller with fixed ends
540 540 540
As standard As standard As standard
2 3 3
SPBX SPBX SPBX
26 29 37
35 40 50
63 63 63
80 80 80
3-point - Cat. 1 and 2 3-point - Cat. 1 and 2 3-point - Cat. 1 and 2
460 480 490

Media